Kenmore Elite Washing Machine LD Fault

Whirlpool Cabrio Washer Error Codes & Repair Help

applianceassistant.com/Washer.../Cabrio-Bravo-Oasis-Error-Codes.php

Whirlpool Cabrio Washing Machine Error Code Problems, Diagnostics, ... Cabrio LdError Washer is taking too long to drain water from the washtub

Kenmore Elite Calypso Top Loading Washer - ApplianceBlog

www.applianceblog.com/.../1297-Kenmore-Elite-Calypso-Top-Loading-...

Sep 11, 2005 - 10 posts - ‎5 authors
My washing machine stopped after filling and won't wash, drain or spin. ... and then come up with either LD, FL Or SL code and stop working.

Whirl Pool Cabrio LD Temp fix pt.2 - YouTube

? 2:59
https://www.youtube.com/watch?v=tFBtD2wUj4g
Jun 21, 2009 - Uploaded by liquid131
Whirl Pool Cabrio LD Temp fix pt.2. animal131 ... How to override an error code on the Whirlpool Cabrio washer - Duration: 3:08. Whirlpool ...

Here is a link to a similar problem.
Kenmore Elite Oasis HE Washer gives ol code doesn drain softner and...

Kenmore Elite Oasis washing machine Tub removal

Honestly, we got rid of the machine and bought a Maytag Neptune. I was over trying to figure out all the codes the Oasis was flashing. We gave up on the first one that started having problems when a friend gave us one identical to ours and it has done a lot of the same things.

This is a no motor movement fault, This could be due to a fault with the RPS (rotor position sensor) or the machine electronics but either way would require an experienced person to repair.

Hello,

The LD means Long drain time...that error code coupled with the hum i believe something is stuck in the drain pump preventing it from turning and that is why its humming

GENE

Greetings,
this washer has a lid switch problem...or possible main board failure, but lid does concentrate on the lid safety switch. If you remember when you open the lid it stops..well, its a safety feature and prevents tub from spinning with lid open...this one is more difficult to service if your not use to working on washers...try unplugging machine and leaving off for awhile...does the door lock? check switch for lid fault

"LD" stands for long drain meaning that the pump could be bad or that it just needs to be cleaned out.

Long Drain
Ld flashes when the water level does not change after the drain
pump is on.
Is the drain hose clogged?
Is the drain hose height greater than 96′?
Is the pump running? If not, see TEST #7, page 13.


If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

ld means lond drain. clear the drain from the pump to end

you can use a shop wet vac on the drain hose to **** the rest of the water out then you can remove the hoses to check to see if anything is suct in hoses or pump-,mike