Cdj 1000-mk-2 my cd player when you push the cue button jump the tracks example track 1 push cue jump to track # 10

The button you need is the Auto Cue button, which is to the left of the top display. Press and hold to turn auto cue off, which puts the player into continuous mode. This button is also the Time Mode button.

Hope this helps

Jaye

The spindle motor may be bad.

Hi,

Seems that the switch under the Cue button is dirty, or broken.

Regards,
Gerard

Hi Mate

I had the same problem and just replaced the cue button on the psb and it works fine, you get them off ebay for £5

CDJ 1000 mk 3 freezing while playing tracks and sometimes freezes when a cd is inserted. The orange cue light comes on but the green play doesnt. Any ideas?

Thanks

hi,

Micro switch of your cue button, need to be replaced.

djajay

[email protected]

Hi,

Sounds like a cue switch problem.

if you havent had your player repaired then you can contact me @ www.audiovisualservices.info

Hope this helps you.

Thank you.

You have the RANDOM feature engaged. Look at the player and push the button under the word "RAND" off. The RAND is just that: random tracks.

the faulty button will not stop it from playing well... replacing them is not hard so long as you have some experience with a soldering iron.
Clean the laser lens with a cotton bud wet with windex... then use a dry one to be sure no residue is left. If it still mistracks... new optics required!. You willl need a pioneer service agent to do this for you. A little complex for the first timer :)

Check circuit protectors, not allowed to tell you further, I am an asc.

capital98