I have a Sanyo Model MAX-5000 10 Disc Car CD Changer. The remote control displays E-07, what does this code mean?I have a Sanyo Model MAX-5000 10 Disc Car CD Changer. The remote control displays E-07, what does this code mean?

When are you people going to learn no one allse can give you a code for your (Equipment) What do you think they have a code sheet for with a universal remote when you buy it? End any decent one it will all so have on the package what brands end products it will work with,

http://buy.id.ebay.com/buying/id/display/400179889332_RCA-5-Disc-Changer-StandAlone-CD-Player-RP8070D

or

http://cgi.ebay.com/ORIG-RCA-ADMIRAL-AUDIO-REMOTE-CONTROL-CRK290-/160562274656

see 2 link above to order

out of focus.
if all of your discs have the same error code 6, it is optical lens problem. have it checked to the nearest service center.

CD ERROR DISPLAYS
CD Changers
E01:
The disc magazine is not inserted in the cd changer
E02:
No disc is inserted in the disc magazine
E04:
The disc is dirty, or the disc is inserted into the disc magazine
upside down
E99 RESET PROCEDURE:
Remove CD magazine by pressing eject button on changer.
Remove all discs from magazine and re-load empty magazine into
changer. Using the Radio RESET CD system by pressing and
holding the “ON”/”POWER” button for about ten seconds, or in
earlier models the “EJECT/6” button.


FM/RF Remote Controls
E99 RESET PROCEDURE FOR REMOTES:
Remove disc magazine from changer by pressing eject button.
Remove all discs from magazine and re-load empty magazine into
changer. Press RESET button on interface unit
WAIT:
The temperature is exceeding more than 55c(130f) and the cd
changer cannot be operated. When the cd changer cools off, this
wait disappears. When the RESET button on the interface unit is
pressed, this WAIT appears for a few seconds.


IF THESE ERROR CODES STILL KEEP APPEARING
CONTACT YOUR DEALER.

CD ERROR DISPLAYS
CD Changers
E01:
The disc magazine is not inserted in the cd changer
E02:
No disc is inserted in the disc magazine
E04:
The disc is dirty, or the disc is inserted into the disc magazine
upside down
E99 RESET PROCEDURE:
Remove CD magazine by pressing eject button on changer.
Remove all discs from magazine and re-load empty magazine into
changer. Using the Radio RESET CD system by pressing and
holding the “ON”/”POWER” button for about ten seconds, or in
earlier models the “EJECT/6” button.


FM/RF Remote Controls
E99 RESET PROCEDURE FOR REMOTES:
Remove disc magazine from changer by pressing eject button.
Remove all discs from magazine and re-load empty magazine into
changer. Press RESET button on interface unit
WAIT:
The temperature is exceeding more than 55c(130f) and the cd
changer cannot be operated. When the cd changer cools off, this
wait disappears. When the RESET button on the interface unit is
pressed, this WAIT appears for a few seconds


IF THESE ERROR CODES STILL KEEP APPEARING
CONTACT YOUR DEALER.

hi there,

use ebay as a browsing tool to look out for the remote. or if you contact the manufactorer they will be able to help you

Any kenwood changer will work. That head unit also supports DUAL changers
Any FM Modulated changer wil also work.

Changer Control Features

• Dual Disc Changer Control Capability (CH1/CH2 & AUX)
• DNPS (Disc Name Presets) with Compatible CD Changers
• DNPP (Disc Name Preset Play) by Remote
• CD Text Ready with Compatible CD Changers
• Direct Access with Remote
• Random/Repeat/Scan Play (Disc/Track)

ER4 normally means jammed.

is it the in dash 4 disc changer?

Mark
www.blueice-electronics.co.uk

Hi the CDX-646 is not coded. it must be your head unit thats coded.what model is the head unit?

you can get your code @ www.carradiocode.co.uk
for 33.50 if its one of the models listed you will nedd the remote comander tho.


Mark
www.blueice-electronics.co.uk

According to manual code simply means electrical or mechanical fault - not extremely helpful.

Try to disconnect and reconnect power and it perhaps will reset the problem.