what are you trying to fig out are you wanting to find out how to power it up or how to fix the compasswhat are you trying to fig out are you wanting to find out how to power it up or how to fix the compass
AnonymousMar 14, 2014
I need to re hook up the wires to a dh 40I need to re hook up the wires to a dh 40
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Click the link below, You do need to know your serial number thrust of motor and length of shaft as well how far away from trolling motor you will install your battery. This link is on Minn Kota Motors website under FAQ you can discuss with a service rep at Minn Kota please call 800-227-6433, but you will still need the information I asked earlier to come up with the answer.
You should only run the motor with a 24v battery or two 12v batters 'jumped' out. To jump the two batteries, connect the positive on one batter to the negative on the other battery and hook the trolling motor battery cables up to positive and negative terminals that are NOT jumped out as you would normally. Don't run this with 12v as you will have serious problems if you do. They do not make a 65lb thrust in 12v - too much pound thrust to run off of 12v.
I need a wiring diagram for a 50 lb minn kota
what are you trying to fig out are you wanting to find out how to power it up or how to fix the compass
I need to re hook up the wires to a dh 40
×