Im getting an f2 error code in my copy machine sharp 2020

https://printcopy.info/?mod=erc&brand=Sharp&model=MX2310U&code=F2-71

Hi,
If you have reset the machine as described & then re--inserted the same toner cartridge giving you the same error code then I would suspect the CRUM chip that is installed on the toner cartridge is faulty.
If your machine is under a maintenance contract which includes the provision of toner then contact your service provider & they should replace it F.O.C. If you have purchased it yourself then contact the supplier advising them of a faulty cartridge. If you replace the toner with a new one, you must reset the machine as above before you insert the new toner.
Hope this helps.
Dave.

http://printcopy.info/?l=en&mod=erc&brand=Sharp&model=AR5623N&code=F2%2070

Sharp AR5623N Error Codes

Sharp AR5623N Error Codes Code: All codes CH Blink CH ON E7 01 E7 02 E7 06 E7 10 E7 11 E7 16 F2 40 F2 64 F2 70 F2 74 H3 00 H3 01 H4 00 H5 01 L1 00 L3 00 L4 01 L4 31 L4 32 L6 10 U2 04 U2 11 U2 12

Code

F2 70

Description

•Improper cartridge (Destination error, life cycle error) •Identific t ion error •Model error •Type error •Destination error •Data abnormality •Misc error Detail •The destination of the machine differs from that of the CRUM. •The trade mark code of the CRUM differs. •The company code of the CRUM differs. •The boot program model code does not coincide with the CRUM model code. •When the CRUM type is other than genuine/ conversion/production rotation. •The machine destination differs from the CRUM destination.

Causes

CRUM chip defect Improper toner cartridge.

Remedy

Replace the toner cartridge.

replace the third party toner cartridge with a OEM

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

oem cartridge not third party

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

sharp ar-5618 in f2 to 2f error

how can i cancel the code F5 on my sharp AL2020

F2-00, ID pattern reading error.
For some reason and it may just require cleaning and recalibration, but the IMAGE DENSITY pattern is not being read properly.
It may need new developer, the drum may need to be.replaced.
First and foremost it should be cleaned, Optics coronas and machine cavity.

Hope this is of some help.
Ed

Sharp AR-5620N getting f-2 error. What is the solution

WHEN THE SHARP AR-5316 PHOTOCOPIER IS SWITCHED ON THE ERROR CODE 4H APPEARSAND THE MACHINE CANNOT BE OPERATED. IHAVE TRIED THE SOLUTION SUGGESTED JUNE THIS YEAR BUT IT DID NOT WORK. WHAT CAN I DO TO GET THE MACHINE TO WORK? IT IS VERY URGENT.