I thought the reason was the bulb. I just replaced the old one, still same problem. When you press the power button. The fan turns on power button blinks green continueously for about 1 minute. Then the power light turns red and blinks until cool off of bulb.
Just click below for how they repair there DLP TV and a picture guide how to replaced the lamp,fan and color wheel .It seems your lamps is defected...
http://www.jangro.com/a/2006/08/15/samsung-dlp-frequent-questions/
how to change your Samsung DLP Lamp.
http://www.jangro.com/a/2006/07/24/samsung-dlp-replace-color-wheel/
Hope this may help;
Regards,
VOTIT
There is an additional problem,
if the bulb had been replaced by a technician, call them back and ask for additional support, since they did not fix the problem.
If you replaced the bulb yourself, then you may have not placed the lamp in the right way, or the bulb was not the problem.
Remove the bulb and put it back in place, leave the unit unplugged one hour, to drain power and to reset.
If the bulb is fine, then it can be some other problem , a defective power board, a problem on the main board, or the small high power board that is energizing the lamp.
×
928 views
Usually answered in minutes!
nothing...........
×