My LG WM-1832CW front load washer will not turn on once it has been programmed for a load. All the lights are on, but it fails to acknowledge the pressure on the button. It started by doing this occasionally, then more regularly, requiring several presses of the button. It became more and more difficult to start until now, when it will not start at all.
I had this problem with another model LG washer dryer and the problem was just the tiny switch (6mm x 6mm) on the circuit board had worn out. They cost about 30 pence on eBay and are very easy to remove and re-solder onto the circuit board as there are only 2 pins. This saved a huge amount of money for a new control board.
I had this problem with another model LG washer dryer and the problem was just the tiny switch (6mm x 6mm) on the circuit board had worn out. They cost about 30 pence on eBay and are very easy to remove and re-solder onto the circuit board as there are only 2 pins. This saved a huge amount of money for a new control board.
Can you post a link of this 2 pin switch?
×
I have exactly the same problem. Could redlea acknowledge if your problem has been solved?
You need to replace the whole control panel assembly.
You can find replacement parts by clicking here and inserting model number.
Sorry, I realize I posted the wrong website, get replacements here , or try here.
On both websites you will need to enter model number, see here if you need help finding the model number on your appliance.
×
1,851 views
Usually answered in minutes!
×