SOURCE: instructions for Krups Gusto espresso maker
http://www.krupsusa.com/Consumer+Services/Product+Support/Results/Manuals/ResultManuals.htm?SelectedService=Manuals&SelectedGuIDService={F506FE01-D7EC-414A-BEC1-AE53E62990C6}&SelectedProdRef=F880
This is the manual :)
SOURCE: how to use krups espresso machine
http://www.electrobest.com/krupinman.html
hers ther manauals on these thx nick rate me as fix ya thx
SOURCE: Need the instruction manual
The 866 was superceded by 874 and 888.
Here's the manual for 874 =>
http://www.krupsusa.com/NR/rdonlyres/C1F9A0BF-7C73-4009-B552-9B75D43B6DDC/2419/CAFEPRESSOF874_endefrnl.pdf
Here are the manuals for 888 models =>
http://www.krupsusa.com/NR/rdonlyres/FEFA75D6-E1B1-4AEF-86BE-86239F8F5C11/19888/88843CafeCentro.pdf
http://www.krupsusa.com/NR/rdonlyres/55222C7A-5B29-4DD2-9828-679A73F140F0/7908/F888_NAm.pdf
http://www.krupsusa.com/NR/rdonlyres/A025B3F7-4253-45C9-95CA-AF3036FD2914/2430/CAFEPRESSOTIMEF888_multi.pdf
You can call KRUPs to see if there are any major differences.
SOURCE: I have a Krups xp2070 that sends hot water to the
The unit has two pressure valves that control release to the drip tray. Once they fail the hot water will go directly to the drip tray when the pressure goes up. The fix will be to replace the pressure valves (pair in series) which only cost about $20. I replaced mine and it fixed the problem. Good luck and happy espressos.
Testimonial: "Thanks! Very helpful. Now we can (probably) solve a problem that will bring espresso back into our lives!"
SOURCE: No espresso coming out.
The problem with the XP4050 is the two safety valves that the water goes trough on its way to the coffee head. They are plastic and some of the parts will just become brittle because of the hot water and the contamination they gather. With my XP4050 they just broke and parts of it were in the rubber tubes that go to the waste tank.They are also very cheaply constructed compared to the more robust parts of this machine. The water to the hot water/steam head does not have these valves and has a completely different routing. I am currently trying to fix the machine with just one valve and parts of the two valves that are still good. Fingers crossed....
1,809 views
Usually answered in minutes!
I have the same issue with an XP4050
same set up on, noisy, heating, no water coming out
Exactly same problem here. Tried cleaning filters but didn't help
I have just bought Krups XP4000.
About 20 minutes after I brewed an espresso, the body is still very warm to touch even though it has been switched off. Is it normal?
I have almost the same issue with an XP 4050 - noise, hot water but nothing trough the coffee - everything is on the bottom tray. I think the directional valves are stuck or... any ideas?
×