We have had a Dacor RSD 30 for 5 years...our clock suddenly displays in Military time. We have turned the breaker off...tried to set again. It reverts back. Also....the manual says it will display am or pm when setting...it doesn't.
HELP....thanks
If you call Dacor they will talk you through the solution but you have to have another person ready to turn the breaker off while someone is pushing a button. I have contacted them and am trying to get the instructions emailed.
Dacor Toll free: 800-793-0093 have model # ready
There have been some occurrences where the Time readout has been in a 24 hour
Military Time Format. In addition, there are also instances where the clock is set for a 50
HZ operational mode causing the readout to gain time.
If either of these situations occur please perform the following to reset the ERC for proper
operation:
Two persons are required the reset function. The first person should be at the power panel
(circuit breaker box) and the second person should be at the oven.
1. Turn the circuit breaker for the oven.
2. While the power is off, the person at the oven should press and hold the "Clock "
button.
3. The circuit breaker should then be turned on while the "Clock" button is still depressed.
Continue to hold the "Clock" button until a single digit number appears. You may then
release the button.
4. Using the "Time-Temp" arrow keys, adjust the number in the display to read the digit
"8", and release button.
5. After approximately 15 seconds, the time of day will appear.
6. Set the clock to the correct time of day by following the instructions in the owner's
manual.
The oven will now function properly.
×
3,366 views
Usually answered in minutes!
our clock is also stuck on military time, no idea how it even got set to military time. searching the web for an answer...
×