I neeed the codes for model 7544

275,270,271. Try these codes. If you wish to get more information, check these links. Setup procedure, and setup code list to many popular remote controls are given.Pull up older posts.
http://electro-medical.blogspot.com/
http://electrohelponline.blogspot.com/

0370 0037 0290 0032 0109 0009 0377 0217 0247 0216 0431 0163 0361 0606
These are the codes for LG TV with this remote control.

try these codes. 18, 59, 67, 76, 77, 78, 92, 93, 94. one of these may work.

Hello
No universal remote control have codes for all DVD player. You have to choose a universal remote control, that have codes listed to your device. Different models of remotes of different companys are intented to use with some particular model of devices. OK.

hi you can use codes to unlock your mobile.to get the codes visit here superunlockcodes here they ask the following details before rendering the codes they are
1. mobile model
2 country from where you brought the mobile
3.provider to which the mobile is locked
4.imei number of the mobile
finally they will send you the unlock codes.

Go to RadioShack.

lost the code book /i have a sanyo tv cannot remember the codes for it

Universal remotes are limited. Power, volume, channel and mute is often all you can get to work. Others buttons such as menu and source and video and antenna and CC (closed caption) will not work with any universal remote. I always recommend the original to my customers.
The original can be bought here:
http://www.replacementremotes.com/store/index.cfm

Try these codes good luck 0035 0553 0508 0243 0036
0070 0102 0217 0109 0490

Hello, follow this link to download the manual and the codes for your remotes:
http://www.sparky-uk.com/one-for-all-digital-4-urc-7544-universal-remote-control-7-p.asp
just right click and save as on the download links.

if this does not work you can try the search method,
you do this by either holding down the device button eg: TV or if you have one the "magic" button for three seconds, a light should then flash twice to say you have done this correctly.
then press the keys 991 then the power button.
you must now press the channel up key (ch+) possibly upto 150 times while the remote cycles through every code.
Once your tv or device switches off stop pressing the ch+ key and press the power button to make sure it switches back on,
(if you press ch+ too many times you can go back by pressing ch-)
When complete press the magic or device key again to save the settings (light should flash twice to confirm)

Many thanks
Mark
(www.sparky-uk.com)