Belkin Bluetooth & LG failing connection

Are they near tablet or phone when u setting the upto Bluetooth

You will need to enable bluetooth on your iPad and then pair the keyboard to the iPad. Try the following:

• On your iPad, tap the settings icon from the Home Screen.
• Tap on General.
• Tap on Bluetooth.
• Toggle Bluetooth to On
• Turn on the Belkin keyboard.
• The keyboard will show up under Devices on the iPad.
  Select Belkin Bluetooth Keyboard.
• A code will appear on the screen.
  Enter this code on the keyboard and click Enter.

A message will pop up when pairing is successful. If pairing fails, repeat the steps above. If you're still unable to pair the two leave a comment and I will help further troubleshoot.

Hope that helps!

First Pair Phone with Device.1. Manage Connections -> Bluetooth Options -> Add Device
2. Select your device from the list of available Bluetooth devices
3. Enter the passkey Then set phone to receive files. 1. Manage Connections -> Bluetooth Options -> Press the menu key and select Options
2. Change the Discoverable setting to Yes Then upload file to Blackberry. 1. Media -> Press the menu key and select Receive Using Bluetooth
2. You should see a message on the phone that says Waiting for Connection.

I have had multiple issues with these wireless adapters. I honestly was unable to find supported drivers for windows 7 and ended up getting a new wireless card.

Hello,

The phone may not have bluetooth capability for file transfering. You can try to go your song that you want to trasfer and click on more option to see if there is a tranfer button or icon for bluetooth. If it does not then the phone does not have the ability to do that. hope this helps.

Each pair of BT enabled phone and headset is a particular world. I don't have the Plantronics, but my LG phone pairs fine with my Lubix stereo headsets. I'll tell you how I managed to pair them: I put my headsets in pairing mode. Then, on my phone, I go to 'Connectivity > Bluetooth > Device list > Options > New'. If my bluetooth stack is off I'm prompted to turn it on. It starts to search for devices, and comes up with my BT headsets' name, I press 'Pair', it prompts me for the pairing code. I enter '0000' (the same code for your Plantronics' headsets, by the way) and Ok. Then, back to the Device list, I select the BT headsets and go to 'Options > Connect'. I'm good to go. After listening to music, I use to go again to 'Connectivity > Bluetooth > Device list', select the headsets and press 'Options > Disconnect'.
Hope it works for you.
Cheers! Carlos

Hello!

Go to your Bluetooth Options Screen and select the option to "Search for New Devices"

Within seconds of pressing this "Search for New Devices" option press the Bluetooth Button on your headset. Your phone should recognise the Bluetooth Headset and prompt you to pair them!

If this solution does not solve your issue, please comment below and I will be more than happy to help you resolve this issue further.

Happy New Year!

Feedback is appreciated!

Hallo Stu,

Try following the below instructions, if you haven't already tried them..

First Time Pairing to your Bluetooth Mobile Phone
When you turn ON your Supertooth Light for the first time, it will automatically go into Pairing mode ready to be found by devices in Bluetooth searches. This will be the case until you have successfully paired a phone. If you have already paired a
phone, please go to the next section.
1. Power ON your Supertooth Light. The Bluetooth Indicator (3) will turn a blinking
red/blue, The kit is now in pairing mode.
2. Go to Point 3 in the next section, “Pairing to your Bluetooth Mobile phone”

Pairing to your Bluetooth Mobile Phone
Pair the SUPERTOOTH LIGHT to your Bluetooth mobile phone to create a “Pairing”
link, or audio connection between the two. This has to be only done once when first connecting each new phone.
1. From OFF, Press and Hold the Accept Button (1).
2. While holding the Accept Button (1), switch the kit on (Press-and-release the
Microphone Shaft (5)).
3. The Bluetooth Indicator (3) will turn a blinking red/blue, when you see
this, release the Accept Button (1). The kit is now in pairing mode.
4. While the kit is in pairing mode, access the Bluetooth menu of your phone. Turn on the Bluetooth function then execute a Bluetooth search, or discover. (See your phone’s manual for specific instructions.)
5. When the phone displays the list of Bluetooth devices, select ST LIGHT.
6. When the phone asks for the password, enter 0000 and press Ok.
7. Set the ST LIGHT as a trusted/authorized device, if this is option in your phone.
Important Note: The kit is now paired. Most phones automatically connect to the
kit after pairing. With some phones you need to connect manually after pairing.
Go back to Bluetooth > Paired devices > highlight ST LIGHT > press
Options > then press Connect.
When connected you may see the Bluetooth Symbol on your phone change
slightly, either inverting in color or changing to a headset or car symbol. The kit
is now ready to use.
Repeat steps 1 -7 above for each new phone you want to use with the
Supertooth Light.

This was copied from the user manual, which you may or may not have already.. Here's a link to a .pdf file of the manual which you can also save to your computer:

http://www.blueantwireless.com/downloads/supertooth_light/supertooth_light_manual.pdf

Hope this helps :)
Season's Greetings!

Chris (ziraffa)

Hello
here are your driver

http://www.belkin.com/support/article/?lid=en&pid=F8T003&aid=5239&scid=0

Almost there gizmo1. In fact one has to go through Connect, Bluetooth then you'll see two tabs. The selected tab has the basic bluetooth options (On/Off, Visibility, name etc) and the second tab shows the list of paired devices. Access this by pressing right.

Once in the list of paired devices Press OPTIONS (normally the left softkey) then "New paired devices". You'll then see what's around and you'll be able to initiate the pairing.

If you're simply looking to send an object, you can do this from the file manager or media library. In the media library select your picture or other object then once again through the left softkey (Options) you should see a "Send" option. Select that, the Nokia will then propose how you wish to send. Choose bluetooth. In the file manager it works in the same way.