WHAT IS SSID IN PSP 3004 NETWORK CONNECTIONS - Sony PlayStation Portable (PSP) Slim (PSP-2000) Console

3004 because it newer and better

Hi there... There is a point where you enter manually the SSID while trying to connect to your wireless network right? That point is the cue. The SSID you put in your PSP must be THE SAME (ultimately) with the NETWORK NAME, in order to communicate to it directly. Say, if your network is named MYHOME, your SSID in your PSP should also be MYHOME and putting it MY HOME (with space) will result to error. That's apart from the network password (WEP key) that you input in the next field...
Hope this helps...

A service set identifier (SSID) is a name that identifies the network. To connect to a wifi network with your PSP follow these steps:
1. Flip the WLAN switch to 'ON'
2. Select Network Setup from the main menu after that select the Network Settings
3. Select Infrastructure mode > Create new connection
4. Select Scan and choose your WiFi`s SSID (name)

Well the SSID isn't given by the PSP.
A SSID is given by the router, which the PSP connects to or otherwise known as your Router name.
By default your router should be showing its SSID publicly so nothing to do there.
On your PSP scan for wifi networks to connect to in the list of access points you'll see names under SSID.
Select and connect and enter the security key of your router if needed.
http://www.youtube.com/watch?v=X5lsiwQNskc - What Is the SSID on a PSP?
http://www.youtube.com/watch?v=1I65uMQf1r8 - How to connect PSP to Wifi connection.

Hi zablancruzma,

To be able to connect your psp wirelessly you need to know the settings of your router. I've listed the steps on how to get the information on your router and Connecting your psp to the internet.

How to access the Router:

1. You need to know the ipaddress of your router. You can refer to the manual or check the Default Gateway of your computer (Make sure that you connect the computer to the router using an ethernet cable for you to get the Default Gateway). Click on START then RUN. Type CMD on the small box on the lower left of the screen. Type IPCONFIG on the black window and get the value of your DEFAULT GATEWAY (it starts with 192.168.x.x)

2. Open a Browser, Type the DEFAULT GATEWAY on the address bar of your Browser. It will ask you for a username and password. (Refer to the manual of your router or post a reply so that i can provide you the username and password of your router)

3. Go to the Wireless Settings Page of your router. Look for the SSID or the Network Name and the Network Key or Passphrase. You can personalize it so that you can easily remeber the details.

4. Make sure you connect to your SSID and enter the Network Key to make it secure.

How to connect your PSP

1. Open Psp
2. Go to Network Settings
3. Go to Infrastructure Mode
4. New Connection (then select available connection)
5. Under Wlan Setting choose Enter Manually or Scan your SSID
6. SSID (Select your SSID)
7. Wlan Security Setting (WEP/WPA/WPA2)
8. Enter you Network Key
9. Test Connection Settings

and lastly Rate me if this helps so i can help others.

Thanks for using Fixya.

You can find your SSID simply by looking at the network your computer is connected to. I can find mine by looking on my Windows Vista laptop by going to Control Panel

You could only enable your wma playback by connecting your psp to internet, ssid simply means wireless network name. If you are trying to connect to internet you will be ask for ssid which means that you should be in a wifi area to connect you to the available network name.

how to modify psp 3004

the psp connects wirelessly, you can't connect it to your computer. you need to have a wireless router. the ssid is the name of your wireless network and the security is the password to get into the wireless network.