CONNECTION does the product connect directly to TV?

Performing a power reset
1. Turn off the television.
2. Unplug the television power cord from the electrical outlet.
3. Let the television remain without power for 60 seconds.
4. Plug the power cord back into the electrical outlet.
NOTE: If the television is plugged into a power strip or surge protector, remove it from the power strip or surge protector and plug it directly into the wall outlet. If the issue is resolved, the problem is with the power strip or surge protector and not the television.
5. Turn on the television.
How to establish an HDMI connection between a TV and other device.
Follow the steps below if the HDMI® connection between your TV and other device is not working:
1. Make sure both the TV and other device are turned on.
2. While turned on, unplug the power cords for the TV and device from the electrical outlet.
3. Disconnect the HDMI cables from the TV and other product.
4. Wait 60 seconds.
5. While the HDMI cables are disconnected, plug the power cords back into the electrical outlet.
6. Turn on the TV.
7. Re-connect the HDMI cables.
8. Turn on the HDMI-connected product.

The TV should now detect the HDMI signal from the connected device and operate normally. If there is still a problem, disconnect the HDMI cable from both products and then reconnect it in the opposite direction. In some situations this has been reported to resolve connection issues.
How to reset a TV to factory settings: https://us.en.kb.sony.com/app/answers/detail/a_id/61396
Hopefully this post helps you! If does, please mark it "accept as solution"

Studio-bound, videotaped 'play' productions were the standard format for British Television from the early days to the 1980s. Acting, direction, and sets were technically done with a theatrical style. The reasoning was that such productions gave an intimate connection to the viewer, as if they are seeing a stage play or a Live TV-show. Dramas like I, CLAUDIUS, UPSTAIRS DOWNSTAIRS, ELIZABETH R and THE PALLISERS were referred to as Television Plays or 'Electronic Theater' (qtd. Alfred Shaughnessy).

Haier 40D3500M LED TV Home Entertainment ' Haier US

www.haier.com/us/products/home.../led-tv/40d3500m.shtml

HaierSimple one cable connection for high definition audio and video. MHL enabled. Mobile High Definition Link allows you to connect compatible devices, such as ...

[PDF]OWNER'S MANUAL - Haier

image.haier.com/manual/tv/LEDTV/.../P020111018525755526455.pdf

+/- . In the MENUscreen, these buttons serve as up/down buttons. 5 POWER. Press to turn on and ... Connect cable pr antenna signal to the TV, either directly or ...

LE40D3281 LED TV - Haier

www.haier.com/us/products/home.../led-tv/le40d3281.shtml

HaierSimple one cable connection for high definition audio and video. MHL enabled. Mobile High Definition Link allows you to connect compatible devices, such as ...

Haier 48D3500 LED TV Home Entertainment ' Haier U

Support Code: 11172
Wii Support Code: 11172 - Successful connection test
Congratulations on your successful connection test! If you receive a "Wii support code," then your Wii was able to successfully connect to your wireless network. You now have access to downloadable games, latest news, and videos about Nintendo products, and even streaming movies and TV shows directly to your TV. Click here to learn more!
http://www.nintendo.com/consumer/wfc/en_na/ds/results.jsp?error_code=11172&system=Wii&locale=en_US&locale=en_US&action2.x=22&action2.y=19

This is true, there is no direct output from the player to that model. You can however get a converter. The easiest path would be A/V to HDMI using a converter box made to make that connection. If you prefer, use a different player to connect to that set.
References:http://www.emersonaudiovideo.com/products/product.php?id=27

http://www.walmart.com/ip/Magnavox-DVD-VCP-Player-DV200MW8/5585221

No Sync indicates that the input signal doesn't match the type of signal that the TV can read. A digital source going to an analog input could cause the issue.

What is your source for the signal?

If you are using the DVI connection on the TV to connect to a computer, try using the VGA input instead. Unfortunately not all TVs can interpret the computer's digital signal. (It is different than the digital signal from a set top box.)

The manual for the TV is available from the product site: http://insigniaproducts.com/products/televisions/IS-LCDTV32.html . The direct link to the manual is: http://insigniaproducts.com/cms/documents/IS-LCDTV32%20UM%20EN_SP_FR.pdf .

Please add a comment with your source and I will offer additional suggestions for solving the error.

I hope this helps.

Cindy Wells

hi cable from the wall into the box then a cable from the box into the tv or hdmi cable from the box to the tv thanks

shaun

Take a SCART lead and connect the output from the SKY box and connect to anyone of the SCART sockets on the TV. Alternatively take the digital out from the Sky box to a digital input on the TV. The necessary connection wires can be obtained from most TV Retailers, Electrical Chain Stores, Some PC dealers, online at eBay, etc. Direct Digital connection will give the best quality picture and if you use a SCART cable then make sure it is high quality thick shielded cable and gold flashed connectors as there are many inferior products out there.

the connection is out from the direct tv box to the in on the dvd player and out to the tv. your rca jacks should read on the back of the player.you will need the cables if you don't already have them

Definitively you broke the connector. Look in the internet the web site of Mintek. But since for a technician is not a big deal to fix, you can take that TV to ANY repair service, because is very easy to do it. I strongly recommend that.