Hey you posted this earlier i need help!PLEASE!

Lots of information and videos. It should be a standard Android Hard Reset.

https://www.google.com/search?q=hipstreet+Aurora+Tablet+factory+reset

..

Hello friend, thank you for your post!
I understand you would like to reset the temperature on your Frigidaire freezer, LFFH17F7HWH. The best way to reset your freezer is to disconnect power from it for at least ten minutes. The factory recommended temperature for your freezer should be set to 0°F. If you need any additional assistance please feel free to reconnect. Hopefully this information is helpful to you. -Matt

To reset BIOS to factory default settings, press "F10" during the POST section and then press "F5" to reinstall factory BIOS settings, Save the new settings and reboot.
To recover to a clean install of the Operating System you will need a set of Recovery Disks. If you do not have them, and the machine will load Windows successfully then you should be able to create them from the "HP Backup & Recovery Manager" although whether this will return to factory default or simply create disks for recovery to its current state I am not sure. Alternatively I understand you can get Recovery Disks from HP, although whether still available for this model - I don't know. Hope this helps.

Satellite 1800-S207
Windows 7 and earlier Toshiba laptops come with the factory software recovery image stored in a special (hidden) area on the hard disk. From this special hidden image, you can restore your computer to its factory-fresh software condition.
How To: Perform system recovery - Windows 7
The following article will show you how to perform a system recovery. To Recover or perform a system recovery means to take the laptop back to factory settings (default settings). System restore means to go back to an earlier point in time on the computer.

There are two methods to perform a system recovery:

• Using Partitioned Recovery Method (Free Recovery)
• Using Recovery CDs / DVDs / Media

Details provided at the link listed below.
http://forums.toshiba.com/t5/System-Recovery-and-Recovery/How-To-Perform-system-recovery-Windows-7/ta-p/279643
Restore means to go back to an earlier point in time on the computer.

Refresh means PC settings will be set to default without effecting personal files or settings.

Reset means back to factory settings. (default settings) - deleting all personal files, programs and settings. Similar to Recover or Recovery


Windows 8 Toshiba laptops have many restore and recovery options available depending on your needs. To better understand these options and how they affect your computer, please view the video available in the linked article below.
http://forums.toshiba.com/t5/System-Recovery-and-Recovery/How-To-Understanding-System-Restore-Refresh-Reset-and-Recovery/ta-p/342690

Hi

You do not say why you want to reset this Router, or give any information about your computer, its Operating System or any problem you might be having with them.

If you look at the back of the Router, you should find a Reset Button or a small Recess that can be pushed in with the tip of a pen. Press and hold this button or the Press Plate in the Recess for a few seconds, then release it to Reset the Router to Factory Settings and the factory-set Username and Password (often both are factory-set to "admin").

On some routers, holding the Reset Button/Press Plate for a longer period (15-20 seconds), can allow the User to change the Router's Username and Password.

I hope this helps.

If this answer does help you, please take the time to rate it. This helps answerers, like me, better understand the needs and the point of view of the asker and guides us in exploring the best ways to provide useful, high quality answers.

If you need further help, please do not hesitate to post another question or add a comment to this question.

Hey there, Did you try to reset it? Factory reset default settings?
Please let me know so i can assist you further.
p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 13.0px Arial}

Thank you for using FixYa!

I hope that I helped you & that this post is helpful to you at most!

Don't forget to rate! :)

You can reset the router.Here is how!

Step 1: With the unit on, place a paper clip into the hole on the back of the unit labeled Reset.



Step 2: Hold paper clip down for 10 seconds and release.

Note: Do not repower unit during this procedure.

Step 3: The unit will reboot on its own. Once the WLAN light stops blinking, the unit is reset.

Resetting the router does not reset the firmware to an earlier version. It will change all settings back to factory defaults.

Note: The factory defaults username is admin, and there is no password.


If you need more help come back.Post / thumbs / testimonial are welcome!

Step 1 With the unit on, place a paper clip into the hole on the back on the unit labeled Reset.



Step 2 Hold paper clip down for 10 seconds and release.

Note: Do not repower unit during this procedure.

Step 3 The unit will reboot on its own. Once the WLAN light stops blinking, the unit is reset.

Resetting the router does not reset the firmware to an earlier version. It will change all settings back to factory defaults.

Note: The factory defaults username is admin, and there is no password.


If you need more help come back.Post / thumbs / testimonial are welcome!

Step 1 With the unit on, place a paper clip into the hole on the back on the unit labeled Reset.



Step 2 Hold paper clip down for 10 seconds and release.

Note: Do not repower unit during this procedure.

Step 3 The unit will reboot on its own. Once the WLAN light stops blinking, the unit is reset.

Resetting the router does not reset the firmware to an earlier version. It will change all settings back to factory defaults.

Note: The factory defaults username is admin, and there is no password.

If you need more help come back.Post / thumbs / testimonial are welcome!

A lot of the computers come with the factory default password "admin". You might try this.
If this is a bios level password, you may have to reset the bios on the motherboard. I would recommend you contact customer support.
If this is a Windows password you can get fixes on the Microsoft website.
Hope this helps.