Just moved to my new place. the system was working fine in my old place. when i reconnected the speakers only the fronts were working.placed all speakers in the fronts and they work. when going thru the sound modes some work some don't. the sub woofer does not come on at all. placed all speakers where they belong. help!!!
I have had this unit for a long time when I started to experience channel drop out then no sound at all. I removed the relays from the output boards (pcbs) and replaced them. They are available through mouser, if you have any skill at desoldering/soldering should be no problem. The relays are sealed and could not be cleaned, replacement was the only option.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Swap speakers over...check the balance isn't fully to the other channel...swap left/right phono cables over (if thats how your using it) other than that i would say is broke.
Easy way to check speaker cable/speaker... touch a small battery (like used in a remote) across speaker wires, you will hear and see the speaker cone move.
Try to reconnect all the wires, the problem seems to be with connection. Instead of spending lot of money on speakers, you can buy just the wires, they are pretty cheap. Hope this helps.
×