Hi Mizanur,
First of all, thank you for posting your question here at Fixya.
Your TV has a built in self diagnostic software that can help us diagnose accurately where the fault came from once the unit gone to malfunction. To activate it, press the following buttons on the remote control within a second on each other in standby mode( red LED is on), "Display", "5", "Volume (+)", "Power". Initial screen will be displays as follows :
To display the self diagnostic list, press on the remote control.
The screen will display the list ofmy tv model is sony KDL-52VL150 . problem is - 12_14_2011_11_36_32_pm.jpg>
Numerical value "0" means that there's no error detected, "1" means that an error was detected.
Please let me know what error code(s) with numerical value "1" to continue our diagnosis.
Kind Regards,
Jdvillanueva
Hi Mizanur,
Sorry, I didn't noticed that you've already replied through another thread.
The self diagnostic results means that there's a problem on the T-Con board that's why it immediately turned to standby mode once the power button key was pressed.
I've saw your board at ebay.com (http://www.ebay.com/itm/SAMSUNG-LJ94-026... ).
×
482 views
Usually answered in minutes!
×