Connecting controlers to wii

if you want to connect it to a wii u then just dont have the wii set up only the wii u and the wii controler wii connect to the wii u if you like my answer comment and follow me

Ensure that the batteries in the controllers are fresh. Make note that there is a small red button inside the battery case. There is also one behind the SD flap on the front of the Wii. Press the red button on the Wiimote so that the blue lights are flashing on it. Then, while the system is on, press the red button on the console. The controller should now be linked to the Wii. Happy gaming!

On the top of the Wii console there is a little flap that opens upwards. You will then be able to see 4 ports that look like a "D" shape, the classic controller plugs into one of those.

Hope this helps.

Hi. Here are the procedures on how you conect Wii to the internet

1 Turn on your Nintendo Wii by plugging it into a power source and pressing the power button.

2 Press the "A" button on your Wii controller to continue from the warning screen.

3 Select "Wii" button in the left hand corner of the main menu, by using your Wii remote to move the hand shaped cursor over the "Wii" button and pressing the "A" button on the controller to select the Wii options.

4 Click the "Wii Settings" box on the right.

5 Select the left arrow to scroll over to more options. Then select "Internet" from the list and "Connection Settings."

6 Choose an open connection by selecting the "Connection 3: None" option, then the "Wireless Connection" option, and the "Search for an Access Point Option."

7 Choose the access point you want to use from the list that will be displayed. Save the settings by clicking "OK." Then click "OK" to start a connection test. When the test is complete you are connected.

if its form someone elses wii you need to unsinc it and resinc with yours.

Try reseting the wii console. This is done by removing the battery from the botton of the console. There is a small battery bay held in by 1 screw. Leave it out for a day and after you install it make sure you press the conect button on the wii. (located under SD card reader door). And the connect button on the controller (located in battery compartment on back of controller). Good Luck.

Have you tried one time syncing it? (By pressing home and then pressing reconnect controllers)

If you have make sure you're not trying to connect it in a single player game. If you do, the second controller will not connect.

Wii Remote Syncing problem is one of the common problem of Nintendo Wii. You may check out the DIY Wii Fix Guide, that explains step by step to fix the problem without any technical knowledge. I hope this guide will solve your problem. It also gives information on fixing many Wii Related Problems, so its a kind of Wii Problems Reference Fix Guide.

my guitar yellow button did'nt work after i just got my wammy to work again

First you need to find a Windows wired or wireless device already connected to the network in order to find out the required settings

Windows XP
1. Click start --> (sometimes settings) --> Control Panel --> Network Connections
2. Double click on the active connection which will say connected underneath
3. Click Support
4. Click Details
5. Now the IP Address, Subnet Mask, Default Gateway, Primary DNS and Alternate DNS which are displayed should be noted.

Windows Vista
1. Click Start --> Control Panel --> Network and Sharing Center
2. Click on "View Status" to the right of your connection
4. Click Details
5. Now the IP Address, Subnet Mask, Default Gateway, Primary DNS and Alternate DNS which are displayed should be noted.

Set these values under "manual settings" in the Wii but add 1 to the last number for the IP Address as this has to be unique on your network