Printing multi copy forms

I already did answer a question like this today. Just google this, because this error is on the net, for many different computers and different OS'n. look what suits the best.

Hi, I can't understand what "Custom size doesn''t present on your driver " means. the drver is just the piece of sofware used by windows to make your printer work. Custome size setting should have nothing to do with the driver.

i am the expert of kyocera mita 6230 or 6330 if any one have problem plz contact with me feel freely [email protected]

Mustafa:

The printer is not meant to use multi-copy carbon invoices. The cause of your problem is the double-feed prevention pad below the paper pickup roller. When the first form is fed, the double feed prevention pad will stop multiple paper feeds. With multi-page carbons, the paper feed roller is trying to feed the form, and is pulling the top page of the form into the feed rollers while the double-feed prevention pad is stopping the bottom form from feeding and the top and bottom pages are sliding because of the carbon paper between the sheets. The only solution that I know of is to buy a printer with a tractor feed and pre-printed fan-fold forms with tractor feed strips on the sides of the forms.

steps:
(a) driving a pickup roller, picking up printing paper stacked in a paper cassette, and then, feeding the picked up printing paper to an image forming unit
(b) after picking up the printing paper in step (a), checking to determine whether or not the printing paper has been fed to the image forming unit(c) when it has been determined in step (b) that the printing paper has not been fed and a paper feed error has been generated, again driving the pickup roller, so as to attempt to pick up the printing paper stacked in the paper cassette again.

try puting a piece of cardbord under the paper but tape it 3mm from the roller.

msp 250 champion dmp printer paper eskip settings ?

Hi,

You can give this a try. This will alter the top of form setting.

http://www.profitmonster.com/printers/ml320tb.html

Let me know if this helps.

It sounds like the paper type is not setup properly on the PC, what program are you using to print your checks with? Have you performed printer setup within that program?