Ice machine - Hoshizaki Freezer Commercial Ice Machines - KM900MRH Commercial Ice Machine

A few simple things to check is the condenser for dust. Blow it out. If their is a water filter going into the unit change it. Get some ice machine cleaner and follow directions. Do these things before calling anyone out.

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

small white button on control board. press once to stop beeping. Very small but it is labeled and very hard to see.

make a few quick checks. If there are water filters on the system, be sure they are not restricked. Could be clogged. Next, check the bin stat. It usually is mounted in the ice bin. If it breaks or goes bad, it shuts down the machine. Start there and let me know if I can be of any further help.

Check condenser coil which is the coil on back with fins, sometimes with metal.mesh filter. If dirty or clogged up clean filter, blow out with air or brush and rinse out, careful not to bend fins. Sounds like issue to me. Unless the dump valve may be leaking by

Bin Thermostat does not work

check the plastic manual water dump valve.MACHINE will not start ref mode until valve is set properly.

the beeping is a fault code i need to know how many beeps it does before it starts over Also you can shut down the pwr this will reset it but if you dont fix the fault it will return

My ice machine Hoshizaki km-500 mah is cycling to fast. Causing poor production of ice it's real small and it doesn't produce enough ice aswell. Wha seems to be the problem.