People are getting cut off during the voice mail message.60 secs

Hi
If the person you are calling has an ansaphone or voicemail set up, then if they cannot take the call you will automatically be put through to their system and a message will tell you when to start leaving your voicemail.
Regarding your own phone, you don't specifically say so but it is in the Cell Phone category, so for a cell voicemail is usually a function of your Service Provider. Nearly all of them provide voice mail but if you don't want it you need to get in touch wth them and tell them to turn it off.
Hope this is helpful, if so would you please register that with Fixya
Cheers

You apparently have unheard messages on the voicemail system provided by your telephone company. This system records messages when someone calls while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.

Simply press and hold for a few secs the "1" key on the phone and then when the voice mail number dials just follow the instructions you get!

Thank you and good luck!

really depends on which voicemail you have. I will assume you have the toshiba voicemail. call voicemail, when it answers press * should ask for your user ID enter 999 and use 999997 as sec code or 999. press 8 then 6 and enter time

How did you program the voicemail so a caller can not leave a voicemail to a particular extension? Line ownership? SO a call goes directly to a milbox?

How can you reprogram the voice message????? Which one, for a particular user or the main Auto attendant greeting????

You have to know the admin login to change a mailbox password.

For that, you need to know which voicemail system this is.
When you log in to check your mail, the lady says, "welcome to Partner......"

Please fill in the blanks.

Is voicemail answering at all?
If so dial the ext to access voicemail.
Dial * 990# or *991#
enter password #
Follow prompts.
Tony

Make sure you have an ANALOG fax phone line

Sounds like you were kicked out and still logged in, so when you tried to go back in, it said, multiple logins.

Try power cycling the system.

If you are using Call Frwd No Answer use code # 603 or if you are using Call Frwd Busy/NAns use # 604 in the following set up.

Press " Intercom/ PDN " plus above code ( #603 OR #604 )
Enter Destination ( Usually Voicemail Access Code )
Press " Speed Dial "
Enter time delay ( 08 - 60 sec )
Press " Redial "

Time delay is default at 12 sec ( 4 ring cycles )

I have FiOs and used some of the info I gathered from this page to get my voice mail working now! To set up my voice mail I called my phone number (from the house phone), then pressed * when the automated system picked up...Your prompted to use a 4 digit pass code, which is the last 4 digits of your phone number (worked for me). From there I listened to the prompts and created a new "4 digit pw" as well as a "name password" by the end of the cycle. It then allowed me to listen to the messages on the phone and delete them! Phone finally says ready on it.