Can anyone help me with my washing machine (aeg lavamat 66840 l).After choose a washing cycle and the timer displays 2.20 h , the washing cycle finishes in 1.45 h !?Any ideas?

The cycle timer could be defective or some timer-dependent function is not being performed

Lavamat?! Where in the *&%^ is this machine from? Yugoslavia! I'm guessing it will not allow water IN Because only the Spin (Centrifuge) cycle works?! So if that is so you need your water inlet valves replaced, there are Two. Even in machines named after a Bar of Soap!

If you need further help, reach me via phone at https://www.6ya.com/expert/steven_b77d19396bfe2249

http://bastlman.wz.cz/2010/08/AEG-Lavamat-error-codes.html

We have AEG lavamat 60210 front load washer and we get E60 code after 1 min. of washing. What is the problem with the machine?

Hi,
EFO error is a water leakage error.You need to call for service.
Thank you

I suggest trying this link. They will help you online.

https://www.justanswer.com/uk-appliance/23fl9-aeg-lavamat-74800-error-50-reported.html

Hi

E20 means there is a bolckage in there
remove filter and clear any debris in there and check impeller is turning ok.

regards

Hi - did you ever find a solution to the problem? My 12 year machine now showing the same issue.

hi

dont know if this is the one you need AEG 1000 Washing Machine
you may need to scrool down to download the manual .


riz.

possibly wire come loose or try disconnecting heater element and repeat spin cycle.if runs well then, replace heater.