Question about Sony CRX835E CD-RW/DVD-ROM (Combo) Burner

1 Answer

Sony CRX835E CD-RW/DVD-ROM free drivers

Windows xp service pack 2.cd rome device is not being detected and installed

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Sony Master
  • 27,725 Answers

Click start control panel administrive tools,computer management,device manager scroll down cd-dvd rom drives you might see a yellow question /exclamation mark ? ! or a red X right click to update driver

or select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall

if this does not fix the problem it might be a registry problem if you cant see your disk drive in windows explorer
Close all open programs

Click on Start, Run, and type regedit and press Enter
Click on the plus signs (+) next to the following folders

HKEY_LOCAL_MACHINE

SYSTEM

CurrentControlSet

Control

Class

{4D36E965-E325-11CE-BFC1-08002BE10318}

This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

Upper Filters

Lower Filters

Upper Filters.bak

Lower Filters.bak

If any of the above keys shown in step 4 are listed, right-click on them and choose Delete

After deleting the keys, close the registry editor
Reboot your computer

Open My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone. or


you might have to physically unplug the leads for this cd/dvd restart your computer then plug them back this should activate the found new hardware wizard or
you might have to uninstall then restart your computer then reinstall your DVD/CD then reinstall the driver for this device

hope this helps you

Posted on Nov 23, 2011

  • Brian Sullivan
    Brian Sullivan Nov 23, 2011

    if you dont have motherboard disk you will need to download the drivershttp://download.cnet.com/dvdram-en-20071...
    http://download.cnet.com/dvdram-en-20070...
    http://download.cnet.com/dvdram-win2k-50...
    http://download.cnet.com/adaptec-udf-rea...
    Adaptec's UDF Reader enables MultiRead CD-ROM drives to read UDF-formatted CD-R and CD-RW discs (such as those written with DirectCD) under Windows 95/98/98SE/NT 4.0/2000.

    hope this helps you

  • Brian Sullivan
    Brian Sullivan Nov 23, 2011

    if those drivers were not righthttp://download.cnet.com/slimdrivers-fre...
    http://www.driver-fix.com/scan.php?id=sc...
    note: it will find all of your outdated drivers

    both of these are free driver solutions
    they will automatically search for and for the correct driver
    hope it helps you

×

Ad

1 Suggested Answer

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 5th generation iPod Nano. I've had it less than one year, and now whenever I plug it into my computer with the USB cord that came with it, my computer says "USB device not recognized" and that the...


  • Check system requirements. - iPod nano (5th generation) requires the following minimum versions of Windows: either Windows XP (Service Pack 3 or later), Vista or Windows 7. If you have one of these versions of Windows, verify that Windows is fully up to date by downloading and installing software updates from Microsoft. If you have Windows XP with Windows XP Service Pack 1 or Windows XP Service Pack 2, download and install Service Pack 3 using Windows Update.

  • iTunes online? - Confirm that iTunes has been downloaded and installed.

  • AMDS online? - iPod nano requires Apple Mobile Device Support (AMDS), which should be automatically installed with iTunes. To verify whether it is installed, click Start > Control Panel. Open the Add or Remove Programs control panel and verify that Apple Mobile Device Support is visible in the list of currently installed programs. If it is not, remove and reinstall iTunes.

  • Check USB connection. - Disconnect all USB devices from the system with the exception of the iPod nano and any USB keyboard and mouse. Then restart your computer. Verify that you are using a high-powered USB 2.0 port. Test with an alternate iPod USB cable if one is available.

  • AMDS - Re-verify that AMDS is running and installed.

  • iTunes usage - Remove and reinstall iTunes.
hope this helps

Oct 14, 2010 | Audio Players & Recorders

1 Answer

Hi, could someone help me? I have this problem: I just upgraded from service pack 2 to 3 on windows ex pro., and now this computer wont detect cds on the drive. This means Im unable to install any programs...


Does the Device Mgr list the Cd drive ? if yes...then there is an issue with the SP3 not alloting a proper IRQ to the HW CD drive, is there any issue with the Drive in the Device Manager properties window ?
else
revert back to SP2 after doing a low-level full format...re-install WinXP SP2....
download this from piratebay and try to install WinXP again....
there could be some files missing in you WinXPSP3 CD

http://thepiratebay.org/torrent/4150301/MICROSOFT.WINDOWS.XP.SERVICE.PACK.3.v5.1.2600.5512.RTM.ENGLISH-W

this link will downlaod a small Torrent file....to use this u must have Bittorrent software...(downlaod it and install first) then open the small link file...Bittorrent will downlaod the full WinXPSP3 to you PC

Jul 25, 2010 | MSI Computers & Internet

2 Answers

Keep getting stack overload. line 0


Your browser is corrupted, reinstall it.

Jul 11, 2010 | Dell Inspiron 1720 PC Notebook

2 Answers

I attempted to install service pack 2 five years ago and my system crashed so had to reload from cd. Since then I have ignored windows update. However I now want to install a expansion portable drive but...


Yes, some Portable Drive requires to Service Pack 2 installed in the Computer to detect it automatically.

Install the Service Pack 2 in the Computer to resolve the issue.

Good Luck!!!!!!!!!!!


Nov 08, 2009 | Computers & Internet

1 Answer

"no audio device" is detected in windows XP spII,


You need to install the audio driver. Go to the Acer WEB site to download the drivers you need, make sure it is Windows XP version for your particular MODEL laptop. Use this link :- http://global.acer.com/support/download.htm By the way, the latest Service Pack for XP is SP3 you should download this and install it, try to borrow SP3 on a CD because it is approx. 350Mb in size.

Jun 07, 2009 | Acer Aspire 5920-6727 Notebook

2 Answers

How to install usb


After you install Microsoft Windows XP Service Pack 2 on a computer that is running Microsoft Windows XP, the universal serial bus (USB) drivers do not appear to update. CAUSE After you upgrade from Windows XP to Windows XP Service Pack 2, the USB drivers... loadTOCNode(1, 'cause'); After you upgrade from Windows XP to Windows XP Service Pack 2, the USB drivers appear with the earlier version numbers, even though the files have been updated. uparrow.gifBack to the top RESOLUTION To resolve this problem, install Windows XP SP2, and then update the drivers for... loadTOCNode(1, 'resolution'); To resolve this problem, install Windows XP SP2, and then update the drivers for the USB devices that are connected to your computer. To update these drivers, follow these steps:
  1. Click Start, click Run, type devmgmt.msc, and then click OK.
  2. Double-click the type of device that you want to update.
  3. Double-click the specific device that you want to update.
  4. Click the Driver tab, and then click Update Driver.
  5. Follow the instructions in the Hardware Update Wizard.
  6. Repeat steps 2 through 5 for each USB device.

Note You can also install Windows XP SP2, and then disconnect and reconnect the USB devices that are connected to your computer. By doing this, you start the Plug and Play utility. The Plug and Play utility updates the version numbers for the drivers.

May 08, 2009 | Microsoft Windows XP Home Edition

2 Answers

Can't install cd software for lifecam 1.4


check www.windowsupdate.com install service pack 2.
to check what you have do this:

hold down the windows key and press R
then write: winver and press ok

it will show you what you have, windows xp and note what it says on service pack? service pack 1? you need 2. get it from www.windowsupdate.com

May 05, 2009 | Microsoft LifeCam VX-1000 WIN-Blk Webcam

1 Answer

No audio device


Reinstall audio driver.. from *********** board companion CD..
That should do the trick

Apr 22, 2008 | Microsoft Windows XP Professional With...

3 Answers

Win XP Service Pack 2


-TRY TO CHANGE THE CD\DVD-ROM AND THE DATA CABLE

Nov 07, 2007 | Matsonic MS9158EP (DSMTSMS9158EP)...

1 Answer

Windows Xp installation


IRQL_NOT_LESS_OR_EQUAL is a hardware error.
might be processor is over heating or you have a bad ram.

please check this article for more explanation on this issue.

Oct 27, 2007 | Microsoft Windows XP Professional With...

Not finding what you are looking for?
Sony CRX835E CD-RW/DVD-ROM (Combo) Burner Logo

215 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Cindy Wells

Level 3 Expert

6073 Answers

Are you a Sony Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...