Magic chef gas range top burners will not stay light

since it is piotless how did you light burner pilots? The oven is piotless and does not have a free standing pilot. here is a link to manual copy and paste page 18 deals with oven.

piotless

Replaced the ignitor.

Electric Ignition (sparking clicking noise when control knob is turned to "light" setting) do not have pilots. The spark ignites the gas.

Hi, If the oven has a standing pilot too, Open the bottom door and locate the main burner. Follow the burner toward the rear of the oven and there will be a flame switch attatched to the burner. Hold the flame near the flame switch and the gas should ignite.
Some model do not have a standing pilot in the oven. Please get me your model number off the label located around the opening of the lower door so I can look this up and instruct you better.

Vic

Hi, Does this oven have electronic ignition?
If the pilot light is out, the burners will not light when you turn it on.
If this does have a pilot light, pop the top up and ight the pilot with a lighter or match. The pilot should be between the 2 burners.
please let me know if I can assist you further.

Vic

The pilot light must be lit and stay lit before you will have any propane coming into the oven. This is a safety feature.

Hi,

The ignitor is not working right and is going bad....
have the repair man replace the ignitor, or DIY....
Check out this tip about your problem...

Oven not Working or Oven not Heating

Oven Problems Replacing the Igniter


heatman101


wwt

you need to plug the oven in; pull it out and you should locate the pwr cord or you may already have it plugged in and have a breaker turned off or a gfi tripped

If you need further help, reach me via phone at https://www.6ya.com/expert/marlon_56d9a24f02585258