I have a Uniden Bearcat Scanner Model # BC147XLT 16 channel scanner radio and lost the instructions on how to program it. How do I get one e-mail to me. for free I am leagelly blind and don't get out much so I like to listeni to my radio. My e-mail address Is [email protected]
The BC147XLT is too old to obtain a manual from Uniden, but here's how you program it:
Turn it on & press 'Manual', then enter the number of the channel you wish to program & press 'Manual' again. Now enter the frequency you want to put in that channel, example 155.550, and press "Enter'. Then press manual to go to the next channel or repeat the first procedure to select a different channel other than the next one. Repeat the programming procedure for each channel.
Press Manual until you hit the channel you want (1-16)
Press "E"
Press in your frequency "123.45" Etc
Press "E"
Hit "Review" to confirm the frequency (it will flash on LCD)
I`ve stored the BC147XLT scanner away for a long time and lost the manual. Send me the Info. please!
Http://www.youtube.com/watch?v=2GOntbr5d4U&feature=share&list=PLqda_TmgO01KAEvKGur8ChJc4uunzwYCr
Press manual/then channel 123 ect. thats the 1 you put that # frequ. too 1to16 ect then put the frequ. in press (e) then scan
10,796 views
Usually answered in minutes!
just a thank you. I had forgotten how to program the scanner, the manual is long gone. The kids unplugged it, the programming was lost and for weeks I've been trying all different combinations of buttons and racking my brain to try and remember the programming sequence. I was close, but as they say, close only counts in horseshoes! thank you for refreshing my memory!!!
i need help programing please
were do i go to find the codes lost my book
I need a diaghram on how to install the power plug on board in bearcat BC 147xlt scanner
i plugged a wet power cord to my handheld Uniden scanner radio BC235xlt. Now it wont turn on
×