Registering Handsets to the Base
Whichever handset you choose to charge in the base is automatically
registered to the base. Any additional handsets must also be registered to
the base before you can use them.
Be sure both handsets are fully charged.
One at a time, place each handset in the base. The
charge/in use LED on
the base begins to flash, indicating the base is registering the handset.
Wait for at least five seconds, then pick up the handset and press
[talk/flash]. If the display shows TALK, the handset is registered. If not,
place the handset in the base to try again.
Press
[end] and continue with the next handset.
Note:
Once both handsets are registered, it doesn’t matter which
handset is placed in the base or the charger.
When you charge the handsets, Caller
ID summary screen and the name of
the handset appears.
This can be find from uniden website.
http://www.uniden.com/pdf/DXAI4588-2om.pdf
I have had this phone system for several years, and it has worked okay, until yesterday. The handset on the answering machine has no dial tone. The face is lit up, but nothing happens when you push talk, end, or any button. The other hand set works fine, and the answering machine works.
We purchased a corded base and cordless handset combo Uniden DECT 6.0 D3098 series a little over a month ago. We also purchased a Uniden headset. All of the components were working fine until last Thursday. Now the cordless handset does not have a dial tone or sound when someone calls. If we connect the headset - same thing. The caller can hear us but we cannot hear them. If we hit the speaker button it's fine. The battery is fully charged and we completed a reset. No change. Your help would be greatly appreciated. Thank you.
×