Nintendo Super NES Console Logo
Anonymous Posted on Oct 18, 2011

My snes will not work with my Dynex tv. I have all the cables and plugged them into the correct ports. Anyone have any thoughts?

1 Answer

Aron

Level 3:

An expert who has achieved level 3 by getting 1000 points

Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

  • Nintendo Master 2,586 Answers
  • Posted on Nov 02, 2012
Aron
Nintendo Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

Joined: Mar 22, 2012
Answers
2586
Questions
0
Helped
390153
Points
78544

Precautions Concerning TV Screen Damage (Image Retention)
Some televisions can be damaged when a stationary image is maintained on the screen for long periods of time, as this could potentially "burn" the stationary image into the screen. This image retention can result from a variety of sources, including test patterns, VCR on-screen programming screens, or picture-in-picture boxes. Playing video games with stationary images or patterns, or leaving video games on hold or pause, may also lead to this type of damage.

Before using your Nintendo system with any TV, especially front and rear projection type TVs, be sure to review all documentation included with your TV to find out whether video games can be played on the TV without damaging it.
When taking a short break, place the game on pause and turn the TV off until you are ready to play again.
If you are not sure about your TV, contact the manufacturer of the TV for more information.
Neither Nintendo nor any of Nintendo's licensees will be liable for any damage to your TV.

Projection TVs (front and rear):
Due to their design, front and rear projection TVs can be more susceptible to image retention. Remember to be sure to review all documentation included with your TV to find out whether video games can be played on your TV without damaging it.

High-Definition TV's (HDTV):
Projection style HDTVs display the image in much the same manner as other type projection TVs and as such, the same possibility of image retention exists. HDTV's that use a tube screen should be no more susceptible to image retention than standard TVs that use a tube screen. For either type of HDTV, follow the precautions on this page.

Plasma TVs or LCD Screens:
We have no information on Plasma TVs or LCD type TVs. Since image retention is a variable of the TV, please check your TV manual or contact the manufacturer directly before connecting any video game system to your television.

1 Related Answer

Anonymous

  • 42 Answers
  • Posted on Sep 11, 2007

SOURCE: Snes video fault

It may have something to do with the age of the console.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Is HDMI4 correct or HDMI1?

depends on what you plug into on back of tv
is it a dvd player with a hdmi cable ?
or is it a tv antenna cable ?
or is it AV cable ?
The input select on the tv menu must be the same as the port you plugged the cable into

DTV = Digital Tv
AV1 = Av input 1 the yellow plug type cable red and white audio plugs
HDMI1 = HDMI1 port
HDMI2 = HDMI2 port
HDMI3 = HDMI3 port
HDMI4 = HDMI4 port

component in looks very similar to av in so if using av cables
use av1 in port rather than component in .
0helpful
1answer

I purchased a 32" Dynex

You only need to plug in the Red/White/Yellow plugs. Make sure you plug them into the correct colors on the TV. Most HDTVs have Red/Green/Blue ports. DO NOT use these ones, they are for receiving HD video signals. A lot of HDTVs also have the Red/White/Yellow plugs on the side of the TV (often labeled "Game", maybe something like "Video 3")

The Red/White/Yellow cables are known as RCA cables or Composite cables so look for any ports with those labels as well.
0helpful
1answer

When i plug my snes to my tv it wont work :/ i plug the cable to tv and put the snes on chan3 then i go on channel 3 with my tv and it show me a black screen ,sometime i hear 2 sec of the game music :/

Hi pikapike,

I see you are going back to the 90's with your Super Nintendo. Firstly I do not know how you can "put the snes on chan 3". If I am correct, all super nintendo cables to the TV are RV coloured ones. therefore once it is plugged into the TV, you will ant the A/V channel? which usually has a separate button.

Secondly if what you say that you get a flash/glimpse of the game, then check the system of your TV. Is it PAL (Europe, Aus, NZ, etc) or NTSC (U.S.) Hopefully you can change the TV settings to match your game console!

Hope this helps,


kamacosmic
6helpful
2answers

Nintendo not working with flat screen tv

The RCA red/white/yellow output of the SNES will plug into any similar input on your TV. If you're missing that cable, do a search on 'super nintendo cable' and you can buy one.

If your TV has only HDMI and no component inputs, then Belkin makes an adapter for that.

You old zapper gun won't work on a LCD screen because the refresh rate of the TV is too fast,so no Duckhunt for you.
0helpful
1answer

Hi i just bought a super nes system it came with RF switch power unit which i have connected to the appropriate connections, i have an LG TV with an golden eye and don't seem to be able to tune the...

Make sure everything's connected in the correct sockets. Turn the SNES on, change to one of the Analogue channels (one of the channels which you control with the TV remote) and start scanning for a signal. The RF cable has to be connected to the analogue port (where a TV aerial would plug in to get analogue channels) and the SNES needs to be switched on.

The alternative is to get a SCART-compatible cable that works with a Gamecube or an N64 and use it with the SNES, as Nintendo had the foresight to add an EXT port which'll let you play the SNES on an AV channel.
1helpful
1answer

SNES works but no color.

Sounds like your AV Multi-out port circuitry is shot. Yest it with an RF adapter, and if it works perfect with an RF adapter, that is the source of your troubles. I'm afraid that the cheapest solution is to buy a SNES motherboard (about $20.00), which is a lot cheaper than a repair shop soldering in new components to fix it. It's not something you can do on your own.. Google SNES Motherboards type 1 or 2
0helpful
2answers

Can't work SNES

Is the TV tuned to the same channel as the SNES ?
Both have to be set to channel 3 or both to channel 4.
0helpful
2answers

My Super Nintendo has a Coax output. My tv only takes component cables. What can I do so that everything will work?

Easy!! Im a game collector and i still have a SNES. The solution is simple

If you have a digital box then that means that a cable goes to the box and from the box a cable goes to your Tv. What you should do is unscrew that cable that goes to your Tv and you will screw the SNES coax cable notice that the SNES cable has and input coax cable entrance aswell so you can screw the Tv cable back in to it so you wont miss watching your fav channels after you finish playing awesome classic games on the SNES
1helpful
4answers

Super Nintendo

I'll just tell you how to set it up with an RF cable.

1: Plug the power adapter in an outlet and plug the other side in the designated spot where it fits. Simple.

2: On the back of the SNES, there should be a switch that says channel 3 or 4. Whatever one the switch is at, it will be the channel to play it at.

3: From where it says "NES CONTROL DECK" on the RF switch, plug that into the SNES.

4: From where it says "TV" on the RF switch, screw it into the supplied ports on the TV. Note that newer TV's don't have this port.

You probably don't need to bother with the antenna port.

Enjoy the SNES! :)
0helpful
3answers

Sharp tv changing channels

Well, the only thing that seems to be working so far is to plug AV cables into the "input 2" ports (on the front of TV). I plugged in my PS2, without turning it on. It has not switched at random since (about 30 minutes - it had been switching off and on for the past 2 hours). Anyone else have similar success?
Not finding what you are looking for?

967 views

Ask a Question

Usually answered in minutes!

Top Nintendo Video Game Consoles & Games Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Aron

Level 3 Expert

2586 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Nintendo Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...