For that press RESET button of your router for 10 seconds then it will automatic restart and reset. then connect router to computer lan port with lan cable. then you can access it with default ip addresshttp;//192.168.1.1 or http://192.168.1.2 Type user as 'admin" and password as "admin" or "1234" or "password" or blank then you can see configuration page of router. Then click on wireless->security then note down the password.It's your password to connect wireless.
Let me know if you need further assistance. thanks for using fixYa.
Step 1: For PC UsersAccess the router's web-based setup page.
PC Step A: Open a web browser such as Internet Explorer.
PC Step B: Go to the Address bar and enter your router's IP address then press [Enter].
NOTE: If you are using Mac to access the router's web-based setup page, following these directions:
Mac Step A: Open a web browser such as Safari.
Mac Step B: Click Safari on the dock and on the Address bar and enter your router's IP address ( is the default IP of most Linksys routers) then press [Return].
Both PC and Mac
NOTE: If the IP address of the router has been changed, type the router's IP address in the Address bar instead.
The router's IP address can be changed by:
If you forgot the router's IP address you can:
NOTE: This procedure will reset your router to factory default. Any settings on the router will be erased. The router's IP address will be (the default IP of most Linksys routers) and "admin" will be the password.
PC and Mac Step 2: When the router's web-based setup page appears, click Administration.
PC and Mac Step 3: Enter the new password on the Password and Re-enter to confirm fields.
or it may look like this if you have an older router:
PC and Mac Step 3:Enter the new password on the Enter New Password and Re-enter To confirm fields.
Step 4:
Click .
http://blogs.cisco.com/home/dont_be_scared_tochange_your_router_passwords/
For more help goto
CISCO Router Support
399 views
Usually answered in minutes!
×