Jenn-Air JES8850 Electric Kitchen Range Logo

Related Topics:

Anonymous
Anonymous Posted on Oct 08, 2011
Be the first to answer

The dual element (which is the front left) on my JES8850BCS is not working, which part do I have to replaced?

Answer This Question

5 Related Answers

aborcass

Ron Coons

  • 2651 Answers
  • Posted on May 24, 2008

SOURCE: replacing a radiant element on

yea sounds like an issue for sure, nut not with the element but hte switches instead, theres a short in one or the other( most likely the dual switch) i wouls reccomend replacing both the switches, the elemenst should be fine.

Ad

Anonymous

  • 521 Answers
  • Posted on Aug 19, 2008

SOURCE: replacing a radiant element on

you are very right the dual limiter is exactly short.

tony2155

Tony Houde

  • 64 Answers
  • Posted on Jun 23, 2009

SOURCE: Front left dual element on a Frigidaire ceramic

open the door and look under the top remove the screws and the top will lift

Anonymous

  • 725 Answers
  • Posted on Mar 11, 2010

SOURCE: I have a Maytag MER5770AAW replacin element


We provide free diagnostic information when you tell us what brand and model number you are having issues with.
We are available from 7 AM – 7 PM CST. We also provide part removal/installation instructions for our customers when parts are purchased through us.
It is our goal to get you back up and running again ASAP, so please contact us when you need us to help you.
We look forward to hearing you and hope that you have a terrific day. Thank you, Ella
http://www.fixya.com/repair/d499389-accurate_appliance_repair_service

Anonymous

  • 551 Answers
  • Posted on Jul 06, 2010

SOURCE: Model JES8850BAS. front left element doesnt work.

there is a problem on the panel. please call a technician to repair that problem.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have an older slide in Jenn Air electric range model JES8850BCS. Some buttons on the control panel work, but some of the others do not (no convection or special functions, but does let oven turn on, but...
There are several specialized appliance sites that can provide diagrams, parts and specialized help. Here is a link for your model:
http://www.partselect.com/Models/JES8850BCS/

Read full answer
Jan 02, 2015 • Jenn-Air Kitchen Ranges
1helpful
1answer

Could this be a User Interface,Board 316239500 part problem? or a Electronic Control Board part problem?
Normally, the E.O.C. (electronic oven control) only controls power the ehe bake/broil side for the oven. Doesn't control power to the element. If you have already replaced the infinite switch to that eye, the element itself could be faulty. There is a sensor inside the element that is supposed to communicate with the infinite switch to determine the proper cycling temp for what you selected.
Read full answer
Jan 31, 2013 • Frigidaire GLEF396 Electric Kitchen Range
0answers

Dual element left front
Read full answer
Be the first to answer Jan 20, 2018 • Kitchen Ranges
1helpful
1answer

Control for dual element has to be wiggled just so -so to shut element off, what do I need to fix it? Heats perfectly, shutting it off is my only problem.
The control you're wiggling (infinite switch)needs replacement. Model# and the position of the dual element (right or left, rear or front) is needed to get the part number.
Read full answer
Mar 03, 2010 • Cooktops
3helpful
3answers

Frigidaire ES340 Range One element from Dual element doesn't work
The elements DO BURN OUT. Replace it.

Often you can see evidence of a hot spot on the element where the final failure occured, but not always.
Read full answer
Oct 27, 2009 • Cooktops
1helpful
1answer

My left daytime and blinker is out, bulb is OK.
if you replaced the bulb and it still dont work turn the car on and off 3times,,the cars computer stops giving the wire power when it sees the bulb is bad so after you replace the bulb it still will not work till you cycle the key a bunch of times or clear the codes,if you got a scanner, if that still dont work,then the headlamp harness is shorted out,thats common too
Read full answer
Aug 28, 2009 • 2003 Saturn ION
4helpful
1answer

Front left dual element on a Frigidaire ceramic top stove GLEF379DBB: inner element has stopped heating. How do I replace the element?
open the door and look under the top remove the screws and the top will lift
Read full answer
Jun 23, 2009 • Frigidaire FEF364DQ Electric Kitchen Range
2helpful
5answers

Replacing a radiant element on a maytag glass top range I'm having strange problems with the two right elements of my MER5770 The front larger dual element will only operate at high heat. When turning on...
If the burner is scorched or pitted, go ahead and replace it. New burners can cost anywhere from $10 to $40. Otherwise, check the burner's electrical connections to make sure there is solid contact. Jiggle the burner in its socket. If it is loose, then remove the burner—most just pull out of the electrical socket, although some are mounted with a screw. (Always unplug the range before removing a burner.) Slightly spread the two terminals apart for a tighter connection. If it still doesn't work, then replace the faulty burner with a functioning burner of the same size. If that burner works, then replace the bad burner with a new one. If it doesn't, then inspect the electrical socket for damage. If it's charred, replace the socket. To do so, remove the screws that secure the socket to the range and then unscrew the range wires. Attach the wire connections of the new socket to the range wires and reassemble the burner.
Read full answer
Aug 19, 2008 • Kitchen Ranges
0helpful
2answers

Replacing a radiant element on a maytag glass top range I'm having strange problems with the two right elements of my MER5770 The front larger dual element will only operate at high heat. When turning on...
yea sounds like an issue for sure, nut not with the element but hte switches instead, theres a short in one or the other( most likely the dual switch) i wouls reccomend replacing both the switches, the elemenst should be fine.
Read full answer
May 24, 2008 • Maytag MER5770 Electric Kitchen Range
0helpful
2answers

Range element does not work
very easy solution!!!chat with me online and ill step you through it save up to $65 (my in-home rate in florida is $75!!!!!!!)
Read full answer
Sep 25, 2007 • KitchenAid KERC507 Electric Kitchen Range
Not finding what you are looking for?

View Most Popular

JES8850 Electric Kitchen Range

  • Kitchen Ranges

Related Question

I have an older slide in Jenn Air electric range model JES8850BCS. Some buttons on the control panel work, but some of the others do not (no convection or special functions, but does let oven turn on, but...

  • Jenn-Air Kitchen Ranges

199 views

Ask a Question

Usually answered in minutes!

Popular Questions

How do you recommend cleaning your stainless range

Jenn-Air ® 48" Professional...

Installation of down-draft exhaust duct for Jenn-Aire cook top

Jenn-Air JGR8850 Gas Kitchen Range

Jenn Air oven door won't open after clean cycle

Jenn-Air SVE47100 Slide-In Electric...

Remove probe from oven

Jenn-Air JES9860 Electric Kitchen...

F1-1 error on Jenn-Air Range

Jenn-Air JGS8750 Gas Kitchen Range

Top Jenn-Air Kitchen Ranges Experts

Paul Carew

Level 3 Expert

3808 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Jenn-Air Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
. JES8850 Electric Kitchen Range...

JES8850 Electric...

Loading...