Will not print

This error occurs when printer fails detecting ink level or printer assume that no ink in the cartridge. We cannot use print, copy,scan, and fax function before the problem fixed. It's recommended for you to replace ink cartridge. To continue using the printer without replacing the cartridge we must deactivate ink level detection function. Be aware that printing in this condition can damage the printer while sending fax or scan is not problem.


If you need any technical help on printer then you can reach at http://www.vtechsquad.com/

This error occurs when printer fails detecting ink level or printer assume that no ink in the cartridge. We cannot use print, copy,scan, and fax function before the problem fixed. It's recommended for you to replace ink cartridge. To continue using the printer without replacing the cartridge we must deactivate ink level detection function. Be aware that printing in this condition can damage the printer while sending fax or scan is not problem.

This error occurs when printer fails detecting ink level or printer assume that no ink in the cartridge. We cannot use print, copy,scan, and fax function before the problem fixed. It's recommended for you to replace ink cartridge. To continue using the printer without replacing the cartridge we must deactivate ink level detection function. Be aware that printing in this condition can damage the printer while sending fax or scan is not problem.

Original source: http://ij-forum.blogspot.com/2008/12/error-message-check-ink-u162u163.html#ixzz2Cpr4Be1K
This error occurs when printer fails detecting ink level or printer assume that no ink in the cartridge. We cannot use print, copy,scan, and fax function before the problem fixed. It's recommended for you to replace ink cartridge. To continue using the printer without replacing the cartridge we must deactivate ink level detection function. Be aware that printing in this condition can damage the printer while sending fax or scan is not problem.

Original source: http://ij-forum.blogspot.com/2008/12/error-message-check-ink-u162u163.html#ixzz2Cpr4Be1K

Hello etilton
Are you trying to print from a pc or do a copy?


Button 11 Fax: Places the HP All-in-One in fax mode and presents the Fax Menu. Press Fax
repeatedly to scroll through the options in the Fax Menu.

Button 12 Scan: Places the HP All-in-One in scan mode and presents the Scan To menu for
selecting a scan destination.

Button 13 Copy: Places the HP All-in-One in copy mode and presents the Copy Menu.
Press Copy repeatedly to scroll through the options in the Copy Menu.

heres the rest of the manual pdf reader required
http://h10032.www1.hp.com/ctg/Manual/c00644922.pdf

If this solution was any help at all please press accept or ask more questions with the other button.
And if you need anything else let me know, you can ask me 24/7 by clicking
on the ask me button, I will ansver in most cases within 24hours.

Thanks and good luck!

FAX is option do you have the FAX kit installed???, Scan is normally a kit also on that legacy Konica machine. if you have the IP address to the machine place it in your url box, if the machine is networked you should see the copier own web page

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

try this
* Press Setup menu (setup button) on the printer.

* Go to the second option print Report.

* Select the 6th option Fax log. Press Ok.

* The fax log will print now.

Hello sir; Either drum cleaning blade or drum cartridge needto replace.

Make sure the rollers that pull the paper through are clean and that the glass is also clean. Clean the rollers with a cloth dampened with alcohol.

it COPIES COLOR, BUT DOESN'T FAX

i have read the manual end to end and I don't think you can.
Only thing I see is this.

Customizing your settings using the Lexmark Fax Solutions You can adjust the fax settings in the Lexmark Fax Solutions. These settings apply to the faxes you send or receive.

1. Click Start Programs Lexmark 7100 Series Lexmark Fax Solutions.
2. Click Adjust speed dial list and other fax settings.
   
3. Click each tab and change the settings as desired.
4. Press Save Settings after you finish your updates. Nothing is saved until you press this button.
5. Click Close.

The following table contains the Setup and Settings tabs for the Lexmark Fax Solutions.
On this tab
You can
Personalize

• Enter your company name and fax number.
• Enter your name, company name, phone number and address as you want them to appear your cover page.
• Select a cover page for your fax.

Send

• Choose to use error correction.
• Choose to use fax header.
• Select a maximum send speed and a print quality for outgoing faxes.
• Choose whether to scan the entire document before dialing the number.
• Select when to print a fax usage report.
• Select when to print a fax activity report

Select when to print an activity report is the only close item I can find. Nothing whatsoever about a confirmation report.

Sounds like switch inside operations panel has broken, there is no reset that will fix it, will need new operations panel.

the reset code on this machine is menu # 2 8 6 4 then maintence shows enter 99, the first bit must be done super quick.

This is a multifunctional unit: it copies, prints, faxes and scans. There are three green buttons listed as "FAX", "COPY" and "SCAN". You need to press COPY if you want to make copies, since the default setting is FAX. The user's manual contained in the CD will show you how to change the default setting to COPY.