Pc always restarts upon booting - Computers & Internet

upon restarting your computer keep tapping f8 until you get a boot screen, go down to disable restart upon system failure. then try to go to netflix after it boots. if it fails again, the blue screen will stay on the screen. more than likely it's saying you don't have enough memory to stream the movies.

If you need further help, reach me via phone at https://www.6ya.com/expert/joel_63c670a84e9f6a97

Hi,
Just go into bios setting, click "F2" upon starting, choose boot sequence, first boot should be the D: or E: drive( CD ), save upon exit and restart. Insert Cd before restarting.
Then follow messages on screen.
Note: DON'T REPLACE ANY SETTINGS iF YOU HAVE NO KNOWLEDGE ON BiOS SETTINGS!

Hope FixYa helps you out!

hit f10 as soon as you see the acer logo upon powering the unit

restart and keep tapping f8 and then select "safe mode" from advanced boot options menu

seems like there is some s/w glitch in it. try to create a new admin a/c. hopefully it will fix the problem.

check first if power supply working, upon turning on observe for possible beep , try to turn on with out memory and observe for a beep, if so m.board and processor working, insert back the memory and restart booting in bios. if power no problem proceed with hdd boot.

Try booting into safe mode. When the computer is just starting, tap the F8 key and keep tapping it until the safe mode options come up. Select "Last Known Good Configuration" and let it continue booting from there. Once inside Windows, check Windows Update to see if your computer had tried to install update KB977165. This recent update has been known to cause problems in XP, including the dreaded BSOD (Blue Screen of Death), due to malware infections. You may want to try the ESET online scanner on your machine and possibly Malwarebyte's Antimalware, available at www.download.com. Always keep running the scans until your computer comes up clean.

http://blogs.zdnet.com/hardware/?p=7377&tag=nl.e539

my samsung sgh-f500 always restart upon opening my cell then continous restarting & keypad not working at this time what will i do

If what you meant was continuing the installation. Change the boot priority to HDD upon rebooting after reformatting and copying of files. Hope this has helped you.

It could be a spyware issue. I'd suggest selecting Setup (usually F2) upon boot and see if the video displays so you can change the BIOS to boot from a CD. Then, boot from the Windows Recovery CD. Also, try F8 and choose Safe Mode to see if it will boot. Then, check back with FixYa if you need additiional help. Good luck.