My sharp AR-M207 is showing error H4.00 call for service i need solution

Use SIM 03-11 to check the shifter motor operations. Check connection of the harness/connector of the shifter motor. Replace the shifter motor. Replace the MCU PWB.

Hi Alafin,

An error code of L4 suggests a motor error. It could be something as simple as a loose cable but it could be a bad motor. I would suggest you call on a local dealer to repair this as you will probably need new parts.

To help you install printer software for Sharp AR-M207, please find the link given below and find the topic mentioned as 'Software' and select Windows xp:
http://www.sharp-cee.com/cps/rde/xchg/scee/hs.xsl/-/html/product_details.htm?product=ARM207

GuruAid.com

anon, WINDOW XP driver for SHARP AR-M207
Sharp Electronics AR M207 Free Driver Download Official
Sharp Ar M207 Driver Download
SHARP AR M207 EB
http://www.driverslib.com/Multifunctional/Sharp/AR-M207.html

U2 04 EEPROM serial communication error
11 Counter check sum error
12 Adjustment value check sum error (EEPROM)
40 CRUM communication error

this the U2 Code Error

scanner return trouble

heat roller low temperture detection&check the thermistor abnormality,heatlamp abnormality,thermostat abnormality,clean the paerdust guide &use sim 5-02
check the heater lamp blinking operation
use sim 14 to clear the slf diagnostic display

heat roller low temperature detection

1. Main motor lock detection
2. shifter motor trouble

# - intrrup key - clear - interrup key 14 print
this all

check fuser lamp, thermost



just