At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: I turn on the camera and i get the leters. fEE on the...
Turn the aperture ring on the lens to its smallest setting (largest f/number). You can control the aperture from the camera body, the same way as on a lens without an aperture ring.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Turn the aperture ring on the lens to its smallest setting (largest f/number). You can control the aperture from the camera body, the same way as on a lens without an aperture ring.
There is no problem with the trigger voltage, which I assume is your primary concern. You may not get all of the features you would with a Nikon flash, but you should be able to use it with the D60 just as you use it with the N80.
The lens you are using has the aperture ring set to something the camera cannot use. Simply turn the aperture ring to the largest number, usually a 22 or 32. Lock that ring if there is a lock and the fee should be gone.
If you get an "E" after loading the film it means that the camera is still Empty and the film has not loaded properly. The most common cause is that the leader has not been pulled out enough past the red mark. I also like to place a sprocket hole on a sprocket tooth (I assume here that the N80 uses a sprocket drive system like other Nikons). When loaded properly the film should advance to frame #1.
Your "FEE" error is something else again and has nothing to do with the film. Apparently the film was properly loaded if you got that also. "FEE" is an aperture error which you get most commonly when you are in one of the auto modes (P or S) and you don't have the lens aperture set to the smallest aperture (largest number, usually f22). Set the aperture ring on the lens to the highest number.
Please rate our solutions and if you still have problems please call back for more ideas to help you
Thanks Richard Scott Technical Support New Zealand
×