Looks like the drum has droped

What exactly is this 'loud noise'? Is it a constant grinding or rumble sound that changes with drum speed or is is an occasional thumping, banging noise as the drum speeds up or slows down? A grinding or rumble is often a drum bearing and Thumping is commonly the 'suspension' the drum rides in to stop it 'walking across the room or shaking itself to pieces as it goes into high spin speeds. Your machine's age will only affect you if it is a very old machine and parts are difficult to find.

There could be an unbalanced load of laundry being washed or the drum bearings are loose and need to be tighten or the filter is blocked in your washing machine.

Something must be inside the blower wheel. I cannot imagine why it would shake like that. This dryer has 4 wheels instead of 2 so it oughta be stable. The only thing to do is get inside the machine and see what is causing it. The dryer with a filter inside is also sometimes known as a series 90 dryer. Look for some series 90 dryer videos on youtube. Like this crappy one I made:


If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Could be a loose basket nut, or on the bottom tub support there are a few springs that help locate the tub. One of the springs could have come off or broke.

this is one of several drum balancing spring clips and it broke or popped-off. This will for sure make the spin cycle shake the drum very much and spill water. Nedd to open the machine housing and replace/repair the spring.

There are 2 shock absorbers/springs attached to the drum. If one of them breaks it will cause a loud banging noise when you wash heavy loads. This is an easy fix. The part is about $22.00 and it is accessed throught the front bottom panel.

i suspect the bearings have gone
hope this has helped :)

Could be a broken spring on top of the drum allowing it to hit back of casing...hope you fix...

If the noise is like a shaking of rattling , like coins being shaked , then it is an object trapped inside the drum.

If instead the noise is a loud grinding , that may get louder on high speed, then it is usually a bad drum bearing.

If dryer is not cooling, check that the noise is not coming from the ventilation fan.

Rollers and belt tensioner can also make noise.

Enter the model number on one of two websites below to get parts and diagrams for your appliance:


Appliance Parts From PartSelect

Appliance Parts Pros

Is it a maytag? My maytag front load washing machine had 2 long bolts with plastic braces on them, to keep the drum still during shipping. Mine would bang and shake all over. I got the book out before I finally figured it out. I had to take the back cover off and remove the bolts and plastic braces over them. They look like they' 8 inches long or so. It works great now.

Carolynn