Hi! Could You help me to open ports TPC UDP ? Wireless-G Broadband Router with RangeBooster model # WRT54GR

Was you email hacked? That would be the email provider side. Like Yahoo and such..

To connect to your wireless router, the router's wireless settings needs to be configured with the SSID, encryption etc. and also the wireless cards in all the laptops/computers needs to be configured with these router's wireless settings. Then the laptops/desktop computers can communicate with your wireless router.
Connect a LAN cable from the Linksys to the LAN port on your computer.
Open a browser and enter the Linksys configuration URL
http://192.168.1.1
The default login = admin
The default PW = admin
You can protect your router by changing the default admin PW (write it down and put it in a safe place)
Go to the wireless configuration and set up the SSID and WPA or WPA2 encryption.
Now apply these settings to the wireless card in your laptop/computer.
To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

You can change the wireless settings of the router and make it secured. So that no one will be able to connect to your wireless network without a password.
Do not share your wireless network password with anybody.
If you want you can also disable the wireless broadcasting at all.

For this you will need to access the settings page of the router and change the settings manually.

Connect the computer to the router with the Ethernet cable and open the setup page of the router using 192.168.1.1

Go to wireless tab and make it secured.

See Linksys router how to

5 - 10 years if it is well taken care of, though it is likely to become obsolete before it dies.

Hi
I understood that , you need to connect router with DSL modem .
1- connect router with pc by cable
2- change your IP address to be DHCP,
3- open internet explorer and type the default IP for the router , usually be 192.168.1.1
4 -it ask you about used ID and Password insert the default one usually be : admin and password : admin or password
5-choose from left menu wlan, and insert your user name and password ,chose the type of connection ppeo broadband .
to this step it must work correctly if you click connect

XBOX

You Will Have to Disable the Firewall In Your modem / Router

And IF it is a router then Open The Ports

• TCP 80
• UDP 88
• UDP 3074
• TCP 3074
• UDP 53
• TCP 53

And Also Make sure that UPnP is Enabled

Login details for routers are usually engraved on the flip side of the router. For your device the login details are usually admin as username and admin also as password.
If by chance it has been changed all you have to do is press the reset button which can also be found on the side of the unit.
Hpope this solution has been helpful?

You Will Have to Disable the Firewall In Your modem / Router

And IF it is a router then Open The Ports

• TCP 80
• UDP 88
• UDP 3074
• TCP 3074
• UDP 53
• TCP 53


And also make sure that UPnP is enabled

You Will Have to Disable the Firewall In Your modem / Router

And IF it is a router then Open The Ports

• TCP 80
• UDP 88
• UDP 3074
• TCP 3074
• UDP 53
• TCP 53


And also make sure that UPnP is enabled

username should be "admin"
password should be "password"