Start simple,have you loaded the driver from the cd that came with it, did it work and then quit? if you do not have the cd canon usa and download driver
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This enables computers on a network to use a Canon iR series colour digital copier as ... For compatibility reasons a static version is available on request to your ...
The hard drive is nothing special. The only draw back is that you need the software to use the copier. If you have a IR-2200 or IR-2800 you can use the had drive from one of them. Catch "22" is that if the copier you are trying to fix has the print boot ROM you have to have the donnor copier to have that option as well. Unless you can have the copier "Flashed" with the soft ware. Good Luck...
Print out a Fiery config page ....there may be something in the fiery settings on the actual Fiery box, you'd have to reboot and run setup when it prompts you.
The machine's hard drive has died. you will need to get a Canon technician out to replace it for you and to re-install the machine's system software. In addition to this you will also need to reconfigure some of the machines settings such as the address book, as this is usually lost when the hard drive is formatted or replaced.
E000602-0113 means that the hard drive is having problems booting up. You may try to remove the boot chip and clean the contacts with rubbing alcahol and reinstall it and turn the copier back on. Most likely you will need to replace the hard drive or try to re-flash the hard drive.
The Canon is coming on with a code E602-0003 can somebody please help it is only 9 months old and the company we bought it from is out of bussiness. Please email me @ [email protected]
×