Lg gw300 will not take pictures says memory full, i've cleared the memory and reset to factory setting but still says memory full

Have you actually formatted the card in the camera ? Just copying the photos does not remove them from the card

Now, on your LG GW300, Dial 1809#*500# and choose Factory reset. No code required and phone won't ask: "Are you sure?". All settings will be reset to default values, including the user code (0000 is the default code after)

Regards

The camera is telling you that the internal memory is full. To get your card to work, you must clear it. With no card in the camera, go into the menu and find "format" and follow the on-screen instructions to erase the internal memory. Then, your card should work unless you formatted it in the computer, in which case you'll have to format (completely erases it) it in the camera.

Hi,

you can do these following steps:

If you want to do a factory reset on your LG GW300 and you’ve lost your user code, then you have to entry into the engineering mode. In the following times, you will find it is very easy to do a factory reset without the user code.
When you open your LG GW300, Dial 1809#*500# on your LG GW300 and choose Factory reset. No code required and phone don’t ask: "Are you sure?". All settings will be reset to default values, including the user code (0000 is the default code). Good luck!


Thank you for using fixya

Please rate me and give testimonials if ever to continue my assistance

You can't just reset to default factory setting to use that phone. That phone need unlock code and you can get LG GW300 unlock code from your vendor provider with some charge up to $80 or you can buy lg unlock code from third party sites with more cheap price.

Code to reset phone :

- Phone without SIM

- Enter 277634#*# or 47328545454#

- Select 'Factory Reset'

Code to enter UNLOCK MENU :

- Phone wit SIM inside

- Enter 2945#*88110#

use these codes

if you are happy with my solution please rate me high and vote for me

1.for not reading the card its not comunicating with panel teminal propaly. Or its loose.
2.for the playlist slow,its wen the memory card is much or its all most full.

when i connect any web my mobile message me insufficient memory.

try moving pictures or applications to your Micro SD card to free up your common memory. Also free up your messages this also caused same problems

Try the 0000 or 1234, this is the universal code. If it does not work contact your service provider to get the master reset code at free of cost