HOW DO I TURN THE RINGER ON. HAND SET READ RINGER OFF

What model AT&T DECT 6.0 phone?

Manual can be found here: http://service.us.panasonic.com/OPERMANPDF/KXTG6311.PDF

I found my owners manual and to adjust the ringer on either the Base Station or Hand Set as follows:
with the hand set in place just use the base arrow up or down to go from 0 (off) to 2 (loud) and on the hand set just use the arrows for high low or off. Just bew sure to have the hand set on the base before adjusting the ringer

jackgee1

Adjusting the Ringer Volume
You can choose from four ringer volume settings on the handset (off, low, medium,
and high). With the phone in standby, use the up arrow or the down on the handset to adjust the
ringer volume.

You can find your manual online in PDF format here:

http://www.uniden.com/pdf/TRU9360om.pdf

T7316 Manual

The volume control adjusts the handset, hands free, headset, and ringer volume. Someone may have fiddled with the buttons and turned the ringer down enough that it doesn't sound when a call is incoming.

Where you check for your caller ID if you push the up button, you should be able to turn the volume up and down which will make the ringer louder or softer. And God Bless you and your husband. Hope all is well

Go to handset settings.. then ringer settings, us left arrow to make the ringer less, press until the reading says volume OFF. To bring ringer On press right arrow to choose ringer volume.
This must be done on all handset you have.
Hope this helps

Hand set reads "Ringer off [2]" How do I get hand set to ring??

to turn the talking caller id off go to the menu press 0 then * then 4, then press 0 again to select off.

to turn the ringer on the handset back on, go to the menu, prees 1, 1, then press 1 for a low ringer, 2 for medium and 3 for high.

Hold the Low volume key on the base unit for sometime. A beep will sound that means the ringer of the base unit is off.