Can,t print, says my printer is offline - Canon PIXMA MP160 All-In-One InkJet Printer

Your Brother printer can be offline, most probably when it is not set as default printer on your computer. Let's take a look at the steps on how do I get my brother printer back online. First, right click on the printer icon in your computer. Go to what's printing and click on printer. Then, remove the check mark in front of use printer offline. The status of your printer would be now back online and ready to print.

https://connectmyprinter.com/how-to-fix-brother-printer-offline-error/

If you are getting a status message as the printer is offline on your pc,and afterward you can't ready to print the reports.
Steps to Resolve the Printer Offline Issue:
Step 1:
At first, you need to check your network through the HP Scan Doctor which encourages you to discover and fix the printing issues.
Steps To Run the HP Scan Doctor

•Open the HP Scan Doctor tool by double tapping the symbol.
•Start- - >Select your printer- - > Fix Printing
•Then the list of issues displayed on the screen as result.
•If the tool shows the white checkmarks at that point there is no issue.
•If the tool shows the white wrench then the issues are found and repaired
•If the tool shows the yellow shout point then the issues are found however that can't be solved or skipped.
•If the device shows the red stamp then you have to take after the on-screen guidelines to determine the issues.
Step 2:

Set Your Printer as Default Printer
•Search your gadget on your PC and select your printer and uncheck the Pause Printing and Use Printer Offline

•If you can capable print implies your printer is online.
•Officejet 4650 keeps going offline then proceeds with following step Step 3:
Check Whether You Connect With Correct Port

•Go to printer- - > Printer Properties - >Port
•For USB association utilize USB or DOT4
•For Network Connection use WSD, organize, Standard TCP/IP Port Step 4:
•Update the printer firmware which may resolve your issues

Step 5:
•Manually connect the wired or wireless connection
Step 6:

•For network connection just you have to add the second printer to your Windows.
•Select your printer - > Properties - >Add Port - > Standard TCP/IP Port - > Next port
•Now you can ready to print implies stop the troubleshooting. Still get the same issue mean you need to connect the printer customer support via +1-800-836-3987

Have you tested the Cable ( maybe test with a replacement)
under your devices and printers is the checkbox on use offline, printer - see whats printing - printer - uncheck use offline

As you've noticed, the Brother printer goes offline with a single update to Windows 10. Even so, Windows 10 updates or driver upgrade is not the only cause for your printer to be offline. The key reason behind a brother printer that displays an offline message in windows 10 is the connectivity issue.

Reasons that cause Brother Printer Offline:-

1.As cable disconnection could also be a reason for the Brother printer offline issue.

2.Faulty USB connections can arise printer offline

Step to fix Brother Printer Offline Windows 10

1.Verify the Brother Printer turned ON and there are no errors on screen.

2. Make sure the Brother printer is connected to the computer properly.

3. Make sure your Brother Printer is set as the default printer in Windows 10 settings.

4. Delete all print jobs from the printer properties option.

Expert Advice - Brother Printer Offline Windows 10

Official Sharp driver had set "use printer offline" setting in the printer properties context menu. After unselecting the "use printer offline", printer is printing again, even after reboot...

hi friend
this is very common problem for f300 series PSC

just delete the printer from printers and faxes and reboot the machine it will install printer again

there is funny thing abt this series it is saying offline when powered on and connected but when you disconnect iit will say "offline-use printer offline"

please try my solution and rate it
thanks

Unplug it and then re plug it in; I suggest USB connection over anything else; don't worry about self install if you already have done so in the past. In the print > hit properties on the icon for bubblejet > go to the ports tab > scroll all thw way to the bottom and click the "USB" checkbox. and you should be good.