Question about Peavey Xr 8600 8 Channel Powered Mixer

1 Answer

How do i hook a peavey fx24 mixer to a Peavey xr8600 with out going through the 8600's mixer? I am wanting to use the 8600 to power my mains and use another amp to power my monitors. can i do this?

Posted by on

  • jamiem314 Sep 22, 2011

    Is the in out jacks at the bottom right front? What are the pre amp 1

  • Megasong
    Megasong Jun 18, 2014

    Labelled Power Amp 1 in and Power Amp 2 In, take the main out line level output from the FX24 to these. As you are using it to power the mains from another mixer this will be the best way as I assume you don't need it as a mixer.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Peavey Master
  • 5,603 Answers

You CAN drive the power amps from the main amp inout jacks BUT the rest of the inout of the 8600 would be dead then. You can connect the L and R from the FX24 to either the media RCA jacks or into the channel9/10 jacks. FOr the latter, use TRS cables. Leave the two selection buttons in the up position.

Posted on Sep 22, 2011

  • 1 more comment 
  • jamiem314 Sep 22, 2011

    Are the inout jacks at the bottom right front? What are the amp 1

  • Fred Yearian Sep 22, 2011

    You could go into the ones labeled power amp in that are bottom row, just to the left of the RCA for record out. Going into these DISCONNECTS the internal preamp so NONE of the channels of this mixer will go through, only that from your external mixer. I would go into the channel 9/10 jacks myself then you can use the inout on the 8600 as well.

  • fsajkfdsa89 Sep 23, 2011

    welcome to:http://www.plzzshop.com

    The website wholesale for many kinds of fashion shoes, like the nike,jordan,prada,****, also including the jeans,shirts,bags,hat and the decorations. All the products are free shipping, and the the price is competitive, and also can accept the paypal payment.,after the payment, can ship within short time.


    free shipping

    competitive price

    any size available

    accept the paypal
    http://www.plzzshop.com

    jordan shoes $32

    nike shox $32

    Christan Audigier bikini $23

    Ed Hardy Bikini $23

    Smful short_t-shirt_woman $15

    ed hardy short_tank_woman $16

    Sandal $32

    christian louboutin $80

    Sunglass $15

    COACH_Necklace $27

    handbag $33

    AF tank woman $17

    puma slipper woman $30
    http://www.plzzshop.com

×

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I want to use theMackie as a sub mixer into a powered "all in one" Peavy mixer, where do I come out of the Mackie into one of my powered mixer line inputs?


Take the main outputs into a stereo input (or a pair of mono inputs) on the Peavey - without knowing which Peavey I cannot tell you further info re set-up but as you'll be sending line level signal you'll need to back off the gain on the channels you input to on the Peavey

Nov 17, 2016 | Mackie Music

1 Answer

L want to need circust for peavey xr8600.


You should contact Ppeavey customer service. Here's the link-
Peavey com

Jan 09, 2016 | Peavey Music

1 Answer

I want to know how to connect a powered subwoofer to the peavey 10 mixer


Connection is hooking up from mixer's main outputs (L,R) to
Subwoofer amp inputs.

Oct 10, 2013 | Peavey Electronics Peavey PV10 Mixer

1 Answer

My husband purchased one of your xr8600 peavey mixer the problem hes having is he cant get the echo settings right.please can you help.


View videos on YouTube regarding "mixer setup". Find the parts of setting up of "effects". Don't worry that you have a different mixer, the principles are all the same for analog mixers. Steps are this: Set the EFX send level for EACH of the input channels (knob above each channel gain) for the proportion you want for each channel. Check that the level you are sending does NOT cause the effect clip light to light very much. Set the effect you want, delay, echo, etc. with the selector knob. Advance the output sent to the power amp with the two knobs in the upper right of the panel. Adjust the "time" knob for the delay or effect depth you want. Then go over the same settings in the same order until you get the sound you want.

Apr 24, 2011 | Peavey Xr 8600 8 Channel Powered Mixer

1 Answer

I have an XR8600 - I am using it without Monitors. The Main/Monitor Send is sending a stonger signal to one speaker than the Main/Main send is to the other. have checked leads and speakers and know it has...


Check the pan cotrols are at 12 o;clock.

Verify your speakers are identical and speaker cord length is about the same.

Swap speakers to make sure it is not the speaker,

Feb 17, 2011 | Peavey Xr 8600 8 Channel Powered Mixer

1 Answer

Hello, What is the proper way to connect an Ashly XR1000 Crossover and a Pyle Pro PTA1400 power amp to my Peavey XR8600 so I can use 2 subs? The subs are not powered, but do have a passive crossover...


Here is a link to the manual:http://www.peavey.com/assets/literature/manuals/00513220_7.pdf I didn't look at the manual for the crossover but this is probably the way I would do it. Look at page 13 in the manual : Come out of the Main out (31 in the diagram) into the main in of your crossover. Go out of your crossover Hi and Mid out setting back into Power amp In 1 (labelled 32 in the diagram). Hook your speakers that you normally use to the output jacks on the back of the Peavey. Make sure you match the output impedances. Go out of your crossover low output into the Pyle power amp and out of the Pyle into your subs. Make sure the impedance ratings of all your speakers match the output impedances of your amps. You will only be running in Mono mode as that is the signal output of the Peavey mixer. You can run faux stereo by using the Main monitor Out as 1/2 the pair and the Main Out as the other 1/2 to both channels of the crossover but you won't be getting a true stereo pan mode.

Aug 22, 2010 | Peavey Xr 8600 8 Channel Powered Mixer

Not finding what you are looking for?
Peavey Xr 8600 8 Channel Powered Mixer Logo

Related Topics:

505 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peavey Music Experts

Michial Gueffroy

Level 3 Expert

1140 Answers

PNiss

Level 2 Expert

151 Answers

The Knight
The Knight

Level 3 Expert

76177 Answers

Are you a Peavey Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...