Mesage "unable to use card"

Sir/Madam
If one of the following messages is displayed on Your Printer,I suggest You Go To Below Official Brother Website For Troubleshooting,

• Unable to Clean (Clean Unable)
• Unable to Init. (Init Unable)
• Unable to Print (Print Unable)
• Unable to Scan (Scan Unable)

http://welcome.solutions.brother.com/BSC/public/as/sg/en/faq/faq/000000/000500/000065/faq000565_012.html?reg=as&c=sg&lang=en&prod=mfc290c_all

Or If You FaceProble Then Follows Us On For Online
Brother Printer Support

ako ganun din ako badtrip e.

Hello,
go to printer folder
click right mouse button on printer icon and select "use this printer online"
If your printer still wont print check communication cable.
At last, try to reinstall printer driver.
Good luck!

where did you save your applications? you may have saved it on your memory card, if the applications are saved on your memory card, the files may have been deleted or corrupted. or if the applications are saved on your phone memory, then it may have been deleted or corrupted.
regarding your second inquiry, you may not have enough memory left, try to delete some apps, try to turn off and on your phone, remove battery and sim card. wait for a few seconds before you turn it on. then try to access some applications.

This camera will only handle a 16GB capacity flash card the camera Firmware will not allow for larger cards. I ran into a similar problem (different camera) but solved the dilemma with updating the camera firmware. I can only suggest you check out your camera model on the Sony web site for updates if you purchase Memory Cards larger then 16GB. If you have cards under 16GB check make sure your camera is set for memory card and not reading from the Internal memory. Another crazy thing is make sure your clock is working (day date & time) and set correctly.

well in this case you should try deleting cookie and then connect to " m.orkut.com"
it will be connected

Its because your card is not enough for running the game or there is no graphics acrd at all.

I want a internet setting which was match with my mobile.mobile no.9664308816

SanDisk Extreme cards are supposed to ship with RecoveryPro software which should help you get the photos back. If the software is not on your card you may be able to get it from their website or another SanDisk card.

Hi,
You might have the switch on SD card set to "read only" , This would stop your tomtom being able to write to the SD card ... hence , " unable to store settings " message . .... OR ... the folder where your tomtom wants to store the settings is corrupted ( on your SD card ) so it can't store them.... or similarly , the file is corrupted on the SD card ( maybe the card is damaged ) so the existing file cannot be overwritten . Check out all these possibilities before suspecting any hardware fault on your tomtom ..... GOOD LUCK