Installed a wall mount.put wrong screw in it touched the inside of tv and made spark.tv will not turn on.
Facing the back of television, if it occured while putting top right screw, that is because, you screw touched power module casing and the fuse inside the TV is gone. All you need to do is goto radio shack or any local store and get a replacement fuse (250v x 5 Amp) and replace it. It may cost you less than 2 bucks.
Symptoms:
TV powers off and never turns on.
May even power in that room or house may have been tripped.
Resolution:
lay the TV face down on the floor.
Remove the screwes ( may be 10 - 15 screws)
Remove rear casing of the TV. It is single casing covering entire rear face of the TV.
Fuse is visibe as soon as you remove the casing.
Replace the fuse.
Put the casing back.
Start enjoying the TV.
Prevention:
Do not use longer screwes to mount monitor brackets on TV casing.
GOOD LUCK!!!
300 views
Usually answered in minutes!
I dunno the blue light is on the power button but when I turn the tv on nothing happens...
SAME EXACT THING BRO
I too have the same problem with my 542i. There were too many screws for mounting bracket. The mouting screw touched inside whil trying choose right one. TV turned off. Even my room electricity tripped. And not TV does not work. Please help if any one knows any solution for my prblem
I had the exact same problem. I did replace the fuse, put it back together (several times) and when I go to plug in the power cord to the back of the tv it blows the fuse every time?!
Help!
Thanks!
×