Apple imac registration question

After downloading an update for Garage Band, my computer is now asking me to register as if it was new. When I enter all the information, I land back at the start of the registration page.

I am now locked out of the system until this process is completed. What can I do?

Anonymous May 11, 2010

Hi there
are you referring to the system asking for registration or 'Garage Band'? There should not be a reg' for garage band.

I imagine you are stuck in the system registration. If that is the case it is a bit more tricky. You will have to boot the mac up from your install disk and run disk utilities. The first thing is to check permissions. You could also custom install the original garage band from the disk that will take it back to the older version. If the system software comes back up you can then try and update. Rather do a total update search for the whole system software first to see if garage band is picked up. If not go to the site to find the update and try again.

If all that fails you might be forced into a re-install.

I'm afraid no short cuts on that one.

1 Answer

Anonymous

Contributor 4 Answers
Posted on Dec 13, 2008

Anonymous

Contributor

Joined: Dec 13, 2008

Answers

Questions

Helped

768

Points

Just type in your original password that came with the product.

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0answers

Am I still registered with psira and are my fees up to date?

Read full answer

Be the first to answer Aug 12, 2017 • Computers & Internet

tip

How to register a Garmin Nuvi GPS.

Hi, To be able you register yourGarmin nuvi GPS, you need to have a Garmin account. Thereafter, you can proceed for the Garmin nuvi GPS registration. After you have created an account, you will have to enter your Garmin account to be able to register your Garmin nuvi GPS. Follow this link to create an account for your new Garmin nuvi GPS; Click here; <a href="https://my.garmin.com/mygarmin/marketing/register.htm">https://my.garmin.com/mygarmin/marketing/register.htm </a> When the link opens, Under language, select English and below, click on "Automotive" icon. This will proceed to the next page. On top of "User-name", you will see "Don't have an account? Create one". Click on the "Create one". It is underlined and typed in blue. Now you are on the registration page. Enter your full name, e-mail address, user-name you would like to use and create a password. After filling all the required information, at the bottom of the registration page, you will see "Create Account'. Click on and and registration is complete. Further more, after the registration, you will need to update your map, follow the below directions; 1. Plug one end of the USB cable into your GPS and the other end into your desktop or laptop computer. The GPS device will load the appropriate driver automatically, and a message on your GPS tells you that it is connected to your computer via USB. 2. Open your Internet browser of choice and type in the following web address: "http://www8.garmin.com/support/collection.jsp?product=999-99999-27 " 3. Download the appropriate version of the software for your computer (Windows or Apple) and Install the WebUpdater by following the wizard (accept defaults). 4. Click "Start," "Programs," "Garmin" and " WebUpdater" to update your firmware and your maps. Periodically check and make sure your software is current. Lastly, for more information about the webupdater, click here; <a href="http://www8.garmin.com/products/webupdater/">http://www8.garmin.com/products/webupdater/</a> I hope you found the above information helpful. Regards.

Read full tip

on May 13, 2011 • GPS

0helpful

1answer

Internet download manager serial number

Step-1 : Firstly GoTo www.internetdownloadmanager.com and download latest trial version of IDM. And if you already have installed IDM on your computer then GoTo ->help->Check for updates...and update your IDM to current version.
Step-2 : It will automatically ask you for registration if you already installed IDM else click on registration, Now a new dialog(window) appears that is asking for Name, Last Name, Email Address and Serial Key..
Step-3 : Enter your Name(Any Name), Last Name, Email ID and in Serial Key paste any key from the following ->
RLDGN-OV9WU-5W589-6VZH1
HUDWE-UO689-6D27B-YM28M
UK3DV-E0MNW-MLQYX-GENA1
7ADWY-RVBYI-MPP2K-Y7BXS
And click on ok to register. You also can enter any key from your side. Means you have to enter wrong key, so enter anything
Step-4: After your click ok, it will show an error message that you have registered IDM using fake serial key and IDM will exit. Now here the hack starts.
Step-5 : Now GoTo "Computer -> C:\(Drive) ->Windows -> System32 -> drivers -> etc". Else in window paste it C:\Windows\System32\drivers\etc .. Xp and vista user cstrong>
127.0.0.1 tonec.com
127.0.0.1 www.tonec.com
127.0.0.1 registeridm.com
127.0.0.1 www.registeridm.com
127.0.0.1 secure.registeridm.com
127.0.0.1 internetdownloadmanager.com
127.0.0.1 www.internetdownloadmanager.com
127.0.0.1 secure.internetdownloadmanager.com
127.0.0.1 mirror.internetdownloadmanager.com
127.0.0.1 mirror2.internetdownloadmanager.com
After adding this, save notepad file and then exit from here.
Note : In windows vista and windows 7, due to security rea

Read full answer

Jul 09, 2013 • Lenovo Computers & Internet

0helpful

2answers

Would like to register my nuvi 1300

Hello,

To be able you register yourGarmin nuvi GPS, you need to have a Garmin account. Thereafter, you can proceed for the Garmin nuvi GPS registration. After you have registered, you will have to enter your Garmin account to be able to register your Garmin nuvi GPS.

Follow this link to register your new Garmin nuvi GPS; https://my.garmin.com/mygarmin/marketing/register.htm

When the link opens, Under language, select English and below, click on "Automotive" icon. This will proceed to the next page.

On top of "Username", you will see "Don't have an account? Create one". Click on the "Create one". It is underlined and typed in blue.

Now you are on the registration page. Enter your full name, e-mail address, username you would like to use and create a password.

After filling all the required information, at the bottom of the registration page, you will see "Create Account'. Click on and and registration is complete.

Further more, after the registration, you will need to update your map, follow the below directions;

1. Plug one end of the USB cable into your GPS and the other end into your desktop or laptop computer. The GPS device will load the appropriate driver automatically, and a message on your GPS tells you that it is connected to your computer via USB.
2. Open your Internet browser of choice and type in the following web addres: "http://www8.garmin.com/support/collection.jsp?product=999-99999-27 "
3. Download the appropriate version of the software for your computer (Windows or Apple) and Install the WebUpdater by following the wizard (accept defaults).
4. Click "Start," "Programs," "Garmin" and " WebUpdater" to update your firmware and your maps. Periodically check and make sure your software is current.

Lastly, for more information about the webupdater, go to; http://www8.garmin.com/products/webupdater/

I hope you found the above helpful.....

Regards.

Read full answer

Aug 30, 2011 • Garmin nuvi 1300 Car GPS Receiver

0helpful

1answer

I just want to register this 1450 series garmin

Read full answer

Apr 28, 2011 • Garmin nuvi 1450 GPS Receiver

1helpful

1answer

How do i register my nuvi?

Hi,

To be able you register yourGarmin nuvi GPS, you need to have a Garmin account. Thereafter, you can proceed for the Garmin nuvi GPS registration. After you have registered, you will have to enter your Garmin account to be able to register your Garmin nuvi GPS.

Follow this link to register your new Garmin nuvi GPS; https://my.garmin.com/mygarmin/marketing/register.htm

When the link opens, Under language, select English and below, click on "Automotive" icon. This will proceed to the next page.

On top of "Username", you will see "Don't have an account? Create one". Click on the "Create one". It is underlined and typed in blue.

Now you are on the registration page. Enter your full name, e-mail address, username you would like to use and create a password.

After filling all the required information, at the bottom of the registration page, you will see "Create Account'. Click on and and registration is complete.

Further more, after the registration, you will need to update your map, follow the below directions;

1. Plug one end of the USB cable into your GPS and the other end into your desktop or laptop computer. The GPS device will load the appropriate driver automatically, and a message on your GPS tells you that it is connected to your computer via USB.
2. Open your Internet browser of choice and type in the following web addres: "http://www8.garmin.com/support/collection.jsp?product=999-99999-27 "
3. Download the appropriate version of the software for your computer (Windows or Apple) and Install the WebUpdater by following the wizard (accept defaults).
4. Click "Start," "Programs," "Garmin" and " WebUpdater" to update your firmware and your maps. Periodically check and make sure your software is current.

Lastly, for more information about the webupdater, go to; http://www8.garmin.com/products/webupdater/

I hope you found the above helpful.....

Regards.

Read full answer

Apr 19, 2011 • Garmin Nuvi 465T Car GPS Receiver

0helpful

2answers

My wife has Apple Mac Desktop Computer 2007. She never does any backups. I don't deal with Apple much. The Safari Program did not work for a long time, tried to download it, but did not work. ...

Yes. The disks return it to new unused state.

Read full answer

Sep 18, 2010 • Apple iMac G4 Desktop

0helpful

1answer

Apple iMac computer will not process system updates or any product update and I cannot download from iTunes

this can help you http://support.apple.com/kb/ht1338

Read full answer

Jul 09, 2010 • Apple iMac Z0CY Desktop

0helpful

1answer

Epson r320 printer w/ no advance settings when linked w/ new IMAC

I had the same problem when installing my Epson R300 onto my new iMac (Snow Leopard). The first install used the newest online driver from Epson. The printer symptoms were exactly like yours. Then I installed the Apple driver updates. It was seamless and now the printer settings can be accessed. Perhaps if you uninstalled (read about that on the Epson site first) and then downloaded the new factory driver, followed by the Apple update which will further update files, you might have some luck. Just a guess on my part. Best wishes.

Read full answer

Mar 04, 2010 • Epson Stylus Photo R300 InkJet Printer

3helpful

1answer

Lost registration code for AppleCare

You will need the original receipt of purchase for the APP. Then call 1 800 myapple and ask for assistance

Read full answer

Oct 31, 2009 • AppleCare Protection Plan for iMac/eMac...

Not finding what you are looking for?

View Most Popular

iMac 24" Desktop

Computers & Internet

Am I still registered with psira and are my fees up to date?

Computers & Internet

284 views

Ask a Question

Usually answered in minutes!

Check Out the Mobile Browsers Report

View all Fixya Reports

Are you an Apple Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Have a manual for Apple iMac 24" Desktop? Or just drag it here!

Related Topics:

Apple imac registration question