Neff oven U1661 shows fault code -5-

temperature ntc failing will need replacement.

Control panel needs to be replaced. It may also be an error code for the repairman.

Just pull them off and replace. Its that simple.

It should fit without any problem most oven housings will accomadate most ovens, those in production now, and those made 10 or more years ago.

Hi.
I would not think that both fan and element are faulty, although it is possible.
if it has a timer make sure that it is on manual and not on auto, as this would stop the oven working.
Other possible fault is faulty main oven selector switch.
Hope this helps. Please do not for get feedback .
Thanks.

Hi.

Yes ,it is the element.

You need to remove the panel at the rear of the oven, this will give you access to the element.

Good luck

The door is v heavy and the hinges being right at the bottom take a lot of strain, especially when the door is in 'half open' position. Once the springs start to wear the hinges are no longer strong enough to hold the top of the door firmly closed. Our U1661 is 8 years old and we've had the hinges replaced twice under extended warranty. The second time the hinges they supplied don't hold the door in this position and it will just drop straight down if you don't support it while you open it.

Hi, Have the same problem today.

Found the following on you tube that may help you!

http://www.youtube.com/watch?v=hSzc4Uqbbr8

Best Ian

You don't need to slide the oven out, just remove the glass covers with a flat bladed screwdriver and then unscrew the old bulbs. Replacement is the opposite.
Bulbs available from Homebase, Wickes, BandQ etc etc.