Emachine w3609 I need to send a friend disassembly instructions for an emachines desk top. they need the cover off for new memory installation, thanks

http://www.retrevo.com/support/eMachines-W3609-Desktops-manual/id/23175ci666/t/2/

http://www.manualowl.com/p/eMachines/W3609/Manual/45114

here is same to read.

google translated
lost the computer disk s/noccy71 emachines model w3609 100 errors 37880 and tine is asking me how do I get
http://server88-208-222-62.live-servers.net/emachines/emachinesrecovery/emachines.asp?keywords=emachines+w3609+recovery+cd+download&recor=1

Memory Upgrade for eMachines eMachines T6528 Computer, the eMachines eMachines T6528 Computer takes the PC3200 DDR SDRAM DIMMs. Supports Dual Channel DDR. Memory Type, and comes installed with 512 MB (removable) of Memory. You can upgrade your eMachines eMachines T6528 Computer to up to a maximum of 4.0 GB Memory, the system has 4 sockets to install Memory, already with 512 MB (removable) standard Memory installed. For best Computer performance use the maximum amount of allowed Memory per slot for your Computer.


As for the Hard Disc.... the following address will give step by step instructions on installing a new HD. http://www.manualowl.com/m/eMachines/T6528/Manual/

Thank You for using FixYa
Tom Miller
KD4DTK

I have checked the emachines website and have the following links for you.

Specifications for you W3609
http://www.emachines.com/support/product_support.html?cat=Desktops&subcat=W%20Series&model=W3609

Drivers for you W3609
http://www.emachines.com/support/drivers.html

Unfortunately, I don't find a manual for your W3609.

If we can help with a specific problem, please let us know.

Brian

eMachines T3642 Computer takes the PC2-5300 DDR2 SDRAM DIMMs. Supports Dual Channel DDR2. Memory Type, and comes installed with 1.0 GB = 512 MB (removable) + 512 MB (removable) of Memory. You can upgrade your eMachines eMachines T3642 Computer to up to a maximum of 2.0 GB Memory, the system has 2 sockets to install Memory, already with 1.0 GB = 512 MB (removable) + 512 MB (removable) standard Memory installed. For best Computer performance use the maximum amount of allowed Memory per slot for your Computer.


INSTALLATION PROCEDURE
1. Place the computer power switch in the "off " position and disconnect the AC power cord.
2. Remove the computer top cover following the instructions in the model-specific owner manual.
3. Before touching any electronic components, make sure you first touch an unpainted, grounded metal object to discharge any static electricity stored on your clothing or body.
4. Locate the memory expansion sockets on the computer motherboard. If all the sockets are full, remove smaller capacity modules to allow room for higher capacity modules.
5. The ejector tabs shown in the illustration are used to remove a module. By pushing outward on the ejector tabs, the module will pop-up from the socket and it can then be removed.
6. Handle your new module carefully; do not flex or bend the module. Always grasp the module by its edges.
7. For most installations, DDR modules can be installed in any available expansion slot. Other installations may require the memory to be installed in a particular sequence based on the modules capacity. Check your owner manual to determine the correct installation sequence for your configuration.

Insert the module into an available expansion socket. Note how the module is keyed to the socket. This ensures the module can be plugged into the socket one way only. Firmly press the module into position, making certain the module is completely seated in the socket. The ejector tabs at each end of the socket will automatically snap into the locked position. Repeat this procedure for any additional modules you are installing. 8. Once the module or modules have been installed, the computer top cover can be reinstalled.
9. Plug in the AC power cord and reinstall any cables disconnected during the installation process.
10. Turn on the computer and follow the instructions in your computer owner manual that describe the steps necessary to allow your computer to recognize the newly installed memory.

I’m happy to help further over the phone at https://www.6ya.com/expert/william_83fc156eee2b555e

Hello,

Here is the website for emachines support. It as free files with information about your system as well the information to call the company about the user manual. If the person who repaired it removed the manual, you could ask them to replace.

http://www.emachines.com/support/product_support.html?cat=Desktops&subcat=W%20Series&model=W3609

Here is another website to download an emachine manuel- it does not specify model http://www.user-guides.co.uk/eMachines/eMachinesCDDownloads.asp

Most E-machines have shared video memory. to increase the amount, enter the set-up utility before windows boots and change the amount to the max.

the blue or the black on the left with white tabs are where the ram is installed. if you go to crucial.com and enter the e-machines model # etc it will tell you what ram is compatible and what the max ram amount is.

Hey iluvyakatu

Does your emachine has inbuild video card or AGP or PCI card? if one it has AGP or PCI card try to reseat it. If it is inbuild try to use AGP card or PCI card and see what happen. Also try to check whether you have an inbuild video and AGP or PCI both installed, if you have both try to use one of them.

good luck

zinja

No - that is, not unless you replace the motherboard. It isn't designed for the new processor.

I don't see the previous post. Why do you need to replace your memory and mother board? How old is the emachine? Some of the P1 and PII systems had mother boards riveted in. If it is older than a P4 it would be best to replace the computer.