Does a repair manual or schematic exist for the jamo a3sub.5 speaker system?

Hello i am from outside the States but i know any KLIPSCH service center is maybe the place for JAMO or they know for sure where you should be in your Country.
Jamo About Jamo About

22K is the impedance listed in the specs but you may have to look on the actual speaker itself to get the impedance of the physical speaker.

contact maplin electronics they are really good at replacement units.

Refer to the applicable Jamo manual.

http://www.jamo.com/na-en/support/owners-manuals/

http://www.jamo.com/images/download/313.aspx

Find it here...

http://www.jamo.com/na-en/support/owners-manuals/

http://www.jamo.com/images/download/779.aspx


The Jamo is self-amplified and accepts Line Level input ONLY.

The HTP-2500 receiver drives a subwoofer directly with SPEAKER LEVEL output only and does not have a volume-controlled output for driving externally-amplified devices.

left and right for speaker and center for sub

There is peobably a fuse located on the back. Your speaekers are probably okay. If anything fried inside, it is probably the output transistors.

hai iam hans i had also a problem with the sub
turned out jamo denmark didnt had the spare parts to fix it?
can u believe that
so i wait 6 weeks and after 100 phone calls to denmark and my local dealer they deside to take the part out of another sub ?.
but i really had to make a a lot of effort to achive this
but for the price the jamo set is exellent
a shame about the service .

check all your plus sign and minus sign that connected to the receiver , if connected wrong you will not have any bass,because it going backward. Good luck!! any quest email me [email protected]