VHS tape will not eject. - Televison & Video

Motors or drive belts not working.

Google

panasonic model tape not ejecting

https://www.google.com/search?q=%E2%80%8Bpanasonic+model+tape+not+ejecting

Press and hold the [EJECT] button on the unit while plugging in the power cord. You can also try on the remote control to press [Drive Select] to select VHS drive and then press and hold for more then 3 seconds the [STOP] button.

The VHS tape is stuck how to eject the VHS tape.

..

Typically a VHS tape has a button on the underside that unlocks when pressed inside the VHS player. The wheels unlock and move the tape in the VHS. If this doesn’t happen, the tape will eject.

unplug then remove the top cover press down on the cassette release and remove the tape then rewind the part of the tape still sticking out by hand push in the button on the side of the cassette to open the cassette cover

take the top off and eject it manualy, there is nothing else u can do with replacing a part, (small white spring loaded, ) probabaly

Try unplugging the player from electrical power for several minutes. Plug the player back in and try to eject the tape.

every time i put tape inside vcr it keeps ejecting but every twenty attempts only it works without ejecting. please help
Note: my VCR is part of TV and DVD player

I had a suggestion that did work. Reach into the VHS compartment with left hand and press down toward the back of the tape. With the right hand press the eject button a few times and the tape did come out. I would not buy a Samsung product again. No help from their 800 tech support. No more playing the VHS side of the player. Lynn

no reset, the infred led inside the unit are bad and need to be replaced common problem, they are located on the ends of the tape mech.

The VHS PlayPak adaptor uses 1 AA battery. When you place your VHS-C tape into the adaptor and close the cover, you will hear the motor running and the red piece on the adapter will move inside. Check the placement of the battery and make sure the clear shrink-wrap has been removed from the battery.