I Bought Prestige induction stove I am getting E5 error can any body help what it means

google Belling range induction hob E5 for answer.

https://finderrorcode.com/belling-oven-with-induction-cooktop-error-codes.html

Rohit, this is a generic fault code for induction cook tops, I am assuming this is the same for your Prestige unit.

1. For error code E9 or E09 on an Induction Cooktop, disconnect power for 10 seconds.
2. Turn back on again then retest the unit operation.

If these steps do not resolve the issue, you will need to contact an authorized service shop.

Rohit, this is a generic fault code for induction cook tops, I am assuming this is the same for your Prestige unit.

1. For error code E9 or E09 on an Induction Cooktop, disconnect power for 10 seconds.
2. Turn back on again then retest the unit operation.

If these steps do not resolve the issue, you will need to contact an authorized service shop.

Tthis is a generic fault code for induction cook tops, I am assuming this is the same for your Prestige unit.

1. For error code E9 or E09 on an Induction Cooktop, disconnect power for 10 seconds.
2. Turn back on again then retest the unit operation.

If these steps do not resolve the issue, you will need to contact an authorized service shop.

Wow. Fixing this error is possible but requires research UcheTechs

Good Afternoon friend, I appreciate your inquiry!

Typically on an Electrolux induction cooktop the "E4" error code stands for key sensor for timer. Which means you could be experiencing an issue with the right board, center board, or left board. I would perform a reset on your cooktop and you can do that by flipping the household circuit breaker off for ten minutes.

If that does not assist with clearing any false error codes or the error "E4" continues to display I would suggest seeking assistance from a professional for proper diagnosis and repair. Hopefully this helps. -Matt

Did u ever find out.mine is doing the same.ive searched everywhere and can't find an answer

prestige induction cooker showing error p with beep sound problem solution

e 3 is error because of high voltage may be more than 30 kW at your house......it will not work with it u have to buy a voltage regulator for it........