Casio Baby-G BG1500A watch. The analog hands are not keeping time. The digital time is accurate.

A detailed description of that proces is found in the manual of your watch. You can find the right manual by the module nr. on the back of your watch (4 digit number in a rectangle)

The manual for your watch can be downloaded via the link provided below:

Timepieces Watches

just pull the crown out and turn the hands until the time shown is correct ,then press it back in

Analog time follows the digital time on Casio watches.If this is not happening,try the hands "set to 0" procedure using the manual.

Assuming all Casio models have the same mode of operation, try this:-

Press the mode button until you see "HS" on the display (hand setting) and then use the 2 and 4 o'clock buttons to adjest the hands.

If this does not work and you do not have the manual for your watch,you can get
instructions from the Casio web site.

Go to the casio web site "casio.com".

Select "support" and the "manuals",
watches;

Accept terms

Select "watch manual archive"

Read the number of the back of your watch and enter it into the search box

y

You can get instructions from the Casio web site.

Go to the casio web site "casio.com".

Select "support" and the "manuals",
watches;

Accept terms

Select "watch manual archive"

Read the number of the back of your watch and enter it into the search box

The analog clock hands on the Casio 2747 will only turn in a clockwise direction, but there is a way to speed them up when you have to move them far around the watch face.

1. In Timekeeping mode (i.e. Date is shown in the digital display), push button "C" (bottom-left) 6 times to enter Hand-Setting mode.
2. Hold down button "A" (top-left) until the digital time starts to flash.
3. Press button "D" (bottom-right) to advance the analog time by 20 seconds, and hold down button "D" for High-Speed.
4. Alternately, for High-Speed, press button "D" (bottom-right) and button "B" (top-right) together at the same time, and then let go. The hands will continue to move automatically. Press any button to stop them BEFORE they arrive at the desired time, then press button "D" several times to arrive at the time of your choosing.
5. Press button "A" (top-left) to exit.
6. Press button "C" (bottom-left) if you want to return to Timekeeping mode.

hold the mode button for a few seconds untill tyhe numbers flash and use the start and stop buttons to change time

You can set the digital and "analog" sections of the watch separately. Press and hold the mode button to get into each watch mode and set accordingly.

I found a hand setting mode. Press lower left button 6 times until the readout shows HS. Press and Hold Upper Left Button (A) until flashing. Press lower right button (D) to move the hand forward. Press upper right button (B) to move the hand backwards.

Dear I received gift of G-300 Casio watch but could not adjust the analog time where as digital time adjusted. Could you please help me to guide for adjsuting its Analog time.

Regards,
Tahir Khan