Looking for a new bottum door shelf for a kelvinator model C500T

Model no. invalid use this link to locate parts
https://www.repairclinic.com/Shop-For-Parts/a4b87c70-x633172/C1r-Kelvinator-Refrigerator-Handle-Parts

http://www.antiqueappliances.com/


I’m happy to assist further over the phone at https://www.6ya.com/expert/david_dc2f9e0a44104720

Doesn't make sense

Poor question... can't answer

I am including a link to the kelvinator support center. It seems that KL600FL may not be the complete model number because the site does not answer anything for that number. . Open the lid or door and look around the frame for a model number label.
Support centre

Please check if there is build up ice around evaporator fan.
Remove rear cover in the freezer and check defrost cycle

Replacement thermostats depends on whether the fridge is a double door or single door model. You can buy this part from your appliance parts store/supplier.

What is the model number of your unit? Is there one listed on the unit?

you can try calling mappliance parts pros, your model # didn't show on their web-site they are at 1-877-477-7278

My sister has the same fridge model. We've removed the door and the bottom bracket supporting the hinge had collapsed up inside the door. We're going to cut out a piece of steel (3-4mm thick) and glue it along the bottom of the door in order for the door hinge to insert into something solid. Looks like it's a weak point in the door construction. Pity Kelvinator wouldn't acknowledge the problem and come up with a solution (other than replacing the door at $340 - which is what we were quoted).