This is a convergence problem. Most likely the STK chips have failed as mentioned by the others. I can tell you that the site that Jean posted will not fix this
problem and could even make things worse. That site pertains to a specific problem that is common in
some Sony sets and should not be used to try to fix any other issue.
Please keep in mind many things can go wrong with TV
sets and you should really do a lot of research before attempting any
adjustment and or repair. There are high voltages present in some areas and they can
reside even when the set is unplugged.
Http://www.somelifeblog.com/2007/06/sony-projection-tv-red-line-repair.html
Go to this Blog. It "should " solve the problem.
Really, Really simple, do it your self solution !!
Instructions and pictures included :D
This blog covers many makes and models with many issues solved, just with that one solution
Give it a try, it's free and simple :D
Wow, can't believe that so many have such similar
problems that the manufacturer of these TV's aren't
covering !!
Been sharing this blog with many others on here with
similar problems, since it helped me solve my
problem and hundred's more ( can read all the positive feedback under the blog )
My problem was very similar to yours ;)
Hope the blog helps you.
Jean
Solution:
Your TV has a convergence problem. Here are some of the most common symptoms.
Screen looks 3D
One or more colors can't be adjusted when using the convergence menu.
Screen is bowed in or warped.
Here is a quick test....
Using your original remote go-to the tv settings then goto the convergence or magic focus section.
Try to adjust the convergence.
You should be able to move them up, down, left, and right.
If you can't move them in all directions your convergence chips are bad and should be replaced. This is a common problem.
Its a fairly easy fix.
You can get a repair kit that includes all the parts from www.TvRepairKits.com. The kit includes a photo instruction guide, original Sanyo STK chips, convergence resistors, etc.
Everything you need to fix it yourself.
Replace STKs both of them STK392-560
221 views
Usually answered in minutes!
double picture with layered coloring
picture is ih 3d,all colors are visable joining together in middle of screen.images are being doubled sometimes they are in triple view.
double vision and lines across mid to upper screen
what in the hell does a red light flashing nine times mean?? we've done the factory reset. it's a late 90's model and it's driving me up a wall!
×